Cisco TelePresence IP VCR 2200 Series Come iniziare - Pagina 11

Sfoglia online o scarica il pdf Come iniziare per Sistema di conferenze Cisco TelePresence IP VCR 2200 Series. Cisco TelePresence IP VCR 2200 Series 15.

Stampa la pagina

Using the VCR

There are a number of ways to create a recording:

Call in to the VCR's auto attendant and select



yourself. Refer to the online help for information on calling the auto attendant

Call out and record. The VCR, via its web interface, calls out to an H.323 or SIP



endpoint and records its media streams

Call in to the VCR after it has been configured to record incoming calls by



default. The setting for the default incoming call action is in

Connections

Call a specific gatekeeper ID or registered SIP extension that has been



configured to trigger recording

Call another endpoint through the VCR (a point-to-point call) via a prefix the



VCR has registered with a gatekeeper or with a SIP registrar. This has the same

effect as calling that endpoint directly, except that the VCR is also in the call and

records both endpoints' media streams

Equally there are a number of ways to play back a recording:

Call out and play. The VCR, via its web interface, calls out to a H.323 or SIP



endpoint and plays back a recording to it

Stream the recording to a user's desktop via a player application such as



QuickTime

Call in to the VCR's auto attendant and select the recording for play back



calling its registered gatekeeper ID or SIP extension

For further information about creating and viewing recordings, refer to the online

help which is accessible from the VCR web interface and to the documentation on

the web site.

Record this session

Settings

Using the VCR

to record