cable matters 107044 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Docking station cable matters 107044. cable matters 107044 12. Hybrid thunderbolt 3 docking station with 96w power delivery

Stampa la pagina

3.5 Connecting the Docking Station

1) Connect the Dock to an AC power outlet

2) Connect the included cable to the Thunderbolt 3 or USB-C port on the computer

3) A computer equipped with Power Delivery should indicate that it is charging

4) Wait up to 20 seconds while USB drivers are automatically installed

5) Check that an LED in the RJ45 port is lit

6) Windows may request the user to approve the Dock

7) Check the status of connected Thunderbolt devices from the Thunderbolt

software in Windows

Troubleshooting Tips

•

Reboot the computer and check that the Dock has AC power

•

Check with the computer maker for updated BIOS and other drivers for Windows

•

Test the Thunderbolt 3 cable with a different device

Do not disconnect the Thunderbolt 3 or USB-C cable from the host while the docking station is in use

•

On some Mac hosts, a DisplayPort monitor may not work if the Thunderbolt cable is disconnected and recon-

•

nected to the host. Try disconnecting and reconnecting the DisplayPort monitor to the dock if this occurs

3.6 Connecting to a LAN or Router

1) Connect an RJ45 patch cable to the Dock (Cat 6 recommended for Gigabit Ethernet)

2) Connect the patch cable to a LAN or router port

3) Check the documentation of your LAN or router to configure network access

4) Link and Status LEDs should blink to indicate a live connection

Troubleshooting Tips

Reboot the computer

•

Check that the Link and Status LEDs are lit

•

Test by turning off all wireless connections on the computer

•

Test the patch cable with a different device or try another Ethernet port

•

Maximum connection speed is limited by the Thunderbolt 3 or USB-C host port, the

•

connected network equipment and the Internet speed

Hybrid Thunderbolt™ 3 Docking Station with 96W Power Delivery