Cisco TelePresence MX700 Manuale - Pagina 12

Sfoglia online o scarica il pdf Manuale per Sistema di conferenze Cisco TelePresence MX700. Cisco TelePresence MX700 45. Single camera on a free standing floor stand or a floor stand secured to the wall
Anche per Cisco TelePresence MX700: Manuale di installazione (32 pagine), Manuale di avvio rapido (12 pagine), Manuale di installazione (28 pagine), Manuale di installazione (29 pagine), Manuale di installazione (32 pagine), Manuale di riferimento rapido (2 pagine), Manuale (45 pagine), Manuale di installazione (29 pagine), Manuale di riferimento rapido (2 pagine), Manuale di riferimento rapido (2 pagine), Manuale introduttivo (46 pagine)

Stampa la pagina

Apply In-room Control panel to the video system

Table of contents

(Not available when using the offline editor. Instead, you should

export the in-room control panel to a file in order to save your work

for later.)

Introduction

Apply the in-room control panel to the video system. You will see the

results immediately on the Touch 10.

Create a user interface

• Choose

API for in-room control

Check the result on Touch 10

(Not available when using the offline editor.)

Widgets

Tap the in-room control icon in the Touch 10 status bar to open the

in-room control panel.

Command reference

Troubleshooting

Tips and tricks

Examples

In-Room Control on Touch 10

for Cisco TelePresence

Example of two sets of in-room control panels. The Global has been

MX200 G2, MX300 G2,

selected (blue light bulb) and a panel consisting of three panes is shown.

MX700, MX800,

To the right of the Share button, a in-room control Homescreen entry icon

SX10, SX20, SX80

has been added.

Collaboration Endpoint

software version CE8.2

D15358.02 - JULY 2016

Which in-room control icons (entry icons) used is defined by the

Panel icon

www.cisco.com

Export > To codec

setting, as shown on the previous page.

Export the In-room Control panel to file

You may also export the in-room control panel to a file. This file can

be imported back into the editor at a later stage. Note that you will

export all your work (Global, Homescreen and In-Call panels)

• Choose

Export > To file

If you are using the offline editor, this is the only way you can save

your work for later.

Exporting to file may also be useful as a way of creating a design

template if you are going to push the same in-room control panel to

multiple video systems.

Files exported while connected to a video system are in the same

format as files exported from an offline editor. This means that any

of these files can be imported into an editor launched from a video

system's web interface, and then pushed to the video system's

Touch 10.

Remove a panel from Touch 10

To remove a panel from the Touch 10, remove it from the editor and

then push your editor configuration to the video system. The panel's

icon should disappear instantly.