cable matters 103093 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Estensore cable matters 103093. cable matters 103093 12. 1x2 hd audio/video extender and splitter

3.3 Receiver Panel Connections

1. Video OUT: Connect to the remote extended display with HDMI

2. IR-R: 3.5mm port for IR Receiver cord

3. CAT IN: RJ45 port for Cat 6 cable

3.4 Connection Instructions

1. Power off all the source equipment and output displays

2. Connect the AC power adapter to the Transmitter and secure the locking ring

3. Connect an HDMI cable to the VIDEO IN port of the Transmitter and the HDMI out port of the

host device. Connect HDMI cables to the Video OUT ports on the receivers and to remote

displays. OPTIONAL: Connect an HDMI cable to the VIDEO OUT port on the Transmitter and

a local display.

4. Connect the Cat 6 cable to the CAT 6 port on the Transmitter and Receiver

5. Connect the IR Transmitter and Receiver cables (See Page 6)

6. Plug the Transmitter power adapter into an AC outlet and depress the On/Off button to turn on

the Transmitter (look for a Green LED)

7. Power on all the equipment and check for a video signal on the extended remote display

8. Select an EDID Mode (See Page 5) if there is no video signal

Notes:

Test all the equipment and cables before installing permanently

•

Don't stack the Cat 6 cables together. Spread them out to get the best network performance

•

1x2 HD Audio/Video Extender and Splitter