Sony BVP-900 Series Manuale operativo - Pagina 19

Sfoglia online o scarica il pdf Manuale operativo per Videocamera Sony BVP-900 Series. Sony BVP-900 Series 48. Color video camera

Attaching the Lens to the Camera

Attach a hanger-mount-type lens recommended by

Sony. For details on the lens, refer to the instruction

manual furnished with the lens.

When you intend to install the following lens,

modification is required on the CCD unit. Refer to

your Sony representative.

Canon

J40×9.5B IMS/J40×9.5B ISS

J18×8B IMS/J18×8B ISS

J14×9BIMS/J14×9B ISS

Fujinon A44×9.5 ΒΕSM-18LP

A44×9.5 ΒΕSM-18LPB

A17×8.5 ΒΕSM-18LP

A17×8.5 ΒΕSM-18LPB

Lens

Loosen the lens-lock knob and turn the lens lock

counterclockwise to the horizontal position.

Align the pin on the lens with the U-shaped notch,

then hook the edge of the lens on the projection of

the camera.

Couple the lens to the camera.

Turn the lens lock clockwise, then fasten the lens-

lock knob.

U-shaped notch

Edge

Lens-lock knob

Attaching the lens to the BVP-900/900P

Notes

Be sure to check the following three points before

attaching the lens:

• That the pan-lock and tilt-lock levers on the tripod

are fixed

• That the specified CCD unit is correctly mounted to

the camera

• That there is not a pin at part A on the lens shown in

the figure below (if there is, remove it). If the pin

cannot be removed, consult your Sony representative.

Projection

Lens lock

17 (E)