Cisco TelePresence VX Clinical Assistant Manuale d'installazione e d'uso - Pagina 17

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Sistema di conferenze Cisco TelePresence VX Clinical Assistant. Cisco TelePresence VX Clinical Assistant 33. Mobile video system

Stampa la pagina

Installing Options

Installing Optional Wireless Access Point (WAP)

If wireless network connectivity is required, mount a

wireless access point (WAP) securely to the cart (see

Wireless Access Point Mount). NOTE: Power to the

cart should be removed before installing the WAP or

switch.

1. If required, install the Power Injector into the base

of the cart, up against the system's Isolation

Transformer, and plug into the provided Power Bar.

2. Use the integrated Network Cable, available inside

the column, to connect the WAP and the "AP"

(Access Point) port on the Power Injector.

3. Connect a supplied Network Cable from the

"Switch" port on the Power Injector to the

NETWORK port on the rear

of the VX Clinical Assistant.

NOTE: Clip the Network

Cable to the Strain Relief

Clip at the bottom right

corner of the interface place

with the NETWORK port.

4. Make the appropriate

network configurations per

the requirements of your

organization.

141299.21 Cisco TelePresence VX Clinical Assistant

WAP

Integrated

Network Cable

Strain

Relief Clip

to POWER BAR

inside BASE

ACCESS

POINT

POWER

SWITCH

INJECTOR

Installing Optional Network Switch

If additional network ports are requires, mount a network switch into the PC Cabinet

NOTE: Power to the cart should be removed

(see PC Cabinet with Switch).

before installing the WAP or switch.

1. Mount the Power Supply for the Switch into the

base of the cart, up against the system's Isolation

Transformer, and plug into the provided Power Bar.

2. Run the Switch's Power Cable up through the

column and plug into the Switch housed inside the

PC Cabinet.

3. Route a supplied Network Cable from the

NETWORK port on the rear of the cart to the rear

of the PC Cabinet and plug into the Switch.

NOTE: Clip the Network

Cable to the Strain Relief

Clip at the bottom right

corner of the interface place

with the NETWORK port.

4. Connect a Network Cable

from the Switch to an

appropriate network source.

NOTE: If using the optional

Retractable Network Caddy,

connect the loose end of the

cable to the Switch, and connect

the retractable end of the

cable to an appropriate

network source.

5. Make the appropriate

network configurations per

the requirements of your

organization.

Strain

Relief Clip

NETWORK

SWITCH

Optional Retractable

Network Caddy

to POWER BAR

inside BASE

POWER for

SWITCH