Cisco 2610 - Router - EN Manuale di avvio rapido - Pagina 7
Sfoglia online o scarica il pdf Manuale di avvio rapido per Hardware di rete Cisco 2610 - Router - EN. Cisco 2610 - Router - EN 19. Cisco 2610: quick start
Anche per Cisco 2610 - Router - EN: Scheda tecnica (8 pagine)
Stampa la pagina2
Connect Cables (continued)
MODEMS
16AM
15
14
13
12
11
IN USE
7
6
5
4
3
Analog modem
port (RJ-11)
RJ-11 modem cable
Connect the Modem Cables
The Cisco 2610 router comes with an 8- or 16-port
internal analog modem module. Use these ports to
connect up to 16 modems.
12
Timesaver
Start by connecting only one
9
3
modem. After you have configured the
6
router settings for this modem and
completed the procedure on page 9
successfully, connect and set up the
remaining modems.
1
Connect one end of the pink modem cable to one
of the numbered modem ports (also pink) on the
router's rear panel.
2
Connect the other end of the pink modem cable
to an RJ-11 telephone wall jack or an RJ-11
outlet in your wiring closet.
10
9
8
IN USE
SERIAL 1
SERIAL 0
CONN
WIC
CONN
2A/S
CONN
SEE MANUAL BEFORE INSTALLATION
2
1
0
EN
SEE MANUAL BEFORE INSTALLATION
LINK
ETHERN ET 0
CONSOL E
RJ-11 jack
SERIAL 1
100-240V – 1A
50/60 Hz
47 W
SERIAL 0
WIC
CONN
2T
AUX
If you followed the suggestion, in the Timesaver
section on this page, and only connected one cable,
you will have to connect the remaining modem
cables after you configure and test the router. See
page 10, for information on how to finish the
cabling.
7