Argo ULISSE ECO Manuale di installazione - Pagina 3
Sfoglia online o scarica il pdf Manuale di installazione per Condizionatore d'aria Argo ULISSE ECO. Argo ULISSE ECO 14. Room air conditioner with remote condenser
Anche per Argo ULISSE ECO: Manuale di istruzioni per l'uso (16 pagine)
Stampa la pagina
1 - GENERAL PRECAUTION
• Check that the voltage and frequency of the power supply match those required by the system.
• Check the possibility to have the power line to the indoor unit (ELECTRIC CABLE LENGTH 3 m).
• Install a double - pole switch, protected by 10 A fuses of the delayed type, upstream the electricity wall socket.
• Make sure that the electrical installation is suitable to supply continuosly current necessary for the air conditioner in
addition to that already used by other electric appliances (white goods, lighting). See the max electric imput indica-
ted on the name plate positioned on the air conditioner.
• Before connecting the air conditioner to a power socket, make sure that the socket is provided with an earth
connection in compliance with local codes.
2 - INSTALLATION SITE SELECTION
INDOOR UNIT
AVOID:
• Positioning the indoor unit into rooms where it could be sprinkled with water (i.e. laundries).
• Installation in areas where leakage of flammable gas or large amount of mist may be expected humidity location.
• Direct sunlight or near by heat source that may affect performance of the unit.
• Installing the unit behind curtains or furniture that obstruct air circulation.
DO:
• Choose a position which allows proper ventilation in the room.
• Verify respect of the minimum recommended maintenance space.
OUTDOOR UNIT
AVOID:
• Direct sunlight or area where hot air from exhaust fans investing the unit.
DO:
• Choose a place as cool as possible and well ventilated.
3 - ACCESSORIES AND TOOLS REQUIRED FOR INSTALLATION
ACCESSORIES
SUPPLIED WITH THE UNIT
FIGURE
PARTS
REMOTE
UNIT CONTROL
BATTERIES FOR
REMOTE CONTROL
PLASTIC PLUG
(MALE AND
FEMALE)
FELT PADS
SUPPORTS FOR
REMOTE UNIT
CONTROL
TOOLS REQUIRED FOR INSTALLATION (NOT SUPPLIED)
• Phillips head screw driver • Tape measure • Level • Hammer drill • Hole saw or key hole saw ø 50
• 19 mm wrench • 21 mm wrench • 24 mm wrench • Hammer • Hacksaw • Core bits 10 mm diameter drill bit.
ADDITIONAL MATERIAL REQUIRED FOR INSTALLATION (NOT SUPPLIED)
• Synthetic oil HAB - Alkylbenzene type ex. EXXON ZERICE S, about 30 gr.
• PVC pipe to insulate hole in the wall, external diameter 50 mm. of minimum length as for thickness wall.
OUTDOOR UNIT SUPPORT
BRACKET KIT
NR°
ACCESSORY SUPPLIED ON REQUEST
RAWL PLUG
1
S X 10
SCREW 7x65
2
WASHER
2 + 2
OUTDOOR UNIT
SUPPORT AND
GUIDE
4
SCREW 4,2x13
2
Before the installation, verify that they are fit for the unit.
3
CONNECTION EXTENSION KITS -
ACCESSORY SUPPLIED ON REQUEST
FIGURE
3
3
3
1+1
2
THE EXTENSION KITS ARE SUPPLIED PRECHARGED
NARROW TUBE
OUTSIDE DIA.
6,35 mm
LENGHT OF 2 OR 4 m
PARTS
NR°
EXTENSION KIT
FOR CONNEC-
TION TUBE
CONNECTIONS
PLASTIC BOX
RAWL PLUG
TAPPING SCREW
ø 3,5 x 45
CLAMP
LARGE TUBE
OUTSIDE DIA.
7,93 mm
EN
1
1
3
3
2