Cisco 2800 Series Configurazione - Pagina 7

Sfoglia online o scarica il pdf Configurazione per Hardware di rete Cisco 2800 Series. Cisco 2800 Series 32. Cisco ios software configuration
Anche per Cisco 2800 Series: Manuale di avvio rapido (13 pagine), Scheda tecnica (8 pagine), Manuale di avvio rapido (47 pagine), Nota applicativa (41 pagine), Manuale di avvio rapido (45 pagine), Configurazione (10 pagine), Panoramica (27 pagine), Scheda tecnica (5 pagine), Scheda tecnica (20 pagine)

Stampa la pagina

Configuring Radio Settings on an Access Point

DETAILED STEPS

Command or Action

Step 1

enable

Example:

Router> enable

Step 2

configure terminal

Example:

Router# configure terminal

Step 3

interface dot11Radio interface

Example:

Router(config)# interface dot11Radio 0/3/0

Step 4

power local {cck | ofdm} {milliwatt | maximum}

power local {milliwatt | maximum}

Example:

Router(config-if)# power local 20

power local {cck | ofdm} {milliwatt | maximum}

power local {milliwatt | maximum}

power client {milliwatt | maximum}

end

copy running-config startup-config

How to Configure Radio Settings on an Access Point

Purpose

Enables privileged EXEC mode.

•

Enter your password if prompted.

Enters global configuration mode.

Enters radio interface configuration mode.

•

The interface argument is in module/slot/port format,

except for the Cisco 800 series and Cisco 1800 series

fixed-configuration routers, where the interface

argument is either 0 or 1.

The 2.4-GHz radio is port 0, and the 5-GHz radio is

•

port 1.

(Optional) Specifies the local transmit power level, which

reduces the radio cell size and interference between cells,

on a 2.4-GHz, 802.11b/g radio.

Specifies the local transmit power level on a 5-GHz,

802.11a radio.

On the 2.4-GHz radio, you can set CCK and OFDM

•

power levels. On the 5-GHz radio, these keywords are

not supported.

•

For the 802.11b/g radio, the milliwatt argument can be

7, 10, 13, 15, 17, or 20. For the 802.11a radio, the

milliwatt argument can be 4, 7, 10, 13, or 16.

Use the maximum keyword to specify the maximum

•

power level. This is the default setting.