Cisco 6160 Note sull'installazione e la sostituzione - Pagina 5

Sfoglia online o scarica il pdf Note sull'installazione e la sostituzione per Hardware di rete Cisco 6160. Cisco 6160 18. Without a pots splitter configuration
Anche per Cisco 6160: Manuale di riferimento rapido (38 pagine), Manuale di installazione dell'hardware (21 pagine), Manuale delle procedure di installazione (32 pagine)

General Safety Precautions

Before working on the equipment, be aware of standard safety guidelines and the hazards involved in

working with electrical circuitry to prevent accidents. Adhere to the following cautions and warnings for

safe and hazard-free installation.

Note

To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance

and Safety Information for the Cisco 6160 System document that accompanied this product.

Before you start the installation procedures, read the entire document for important information and

Caution

safety warnings.

Caution

Proper ESD protection is required whenever you handle Cisco equipment. Installation and maintenance

personnel should be properly grounded by means of grounding straps to eliminate the risk of ESD

damage to the equipment. Equipment is subject to ESD damage whenever it is removed from the chassis.

If fuses are already installed in the fuse and alarm panel, remove them. You can replace the fuses after

Caution

the system is installed. Do not power up the system while you install and connect the system.

It is important that the chassis cooling fans run continuously while the system is powered.

Caution

Any module that is only partially connected to the backplane can disrupt system operation.

Caution

This warning symbol means danger . You are in a situation that could cause bodily injury. Before you

Warning

work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar

with standard practices for preventing accidents. To see translations of the warnings that appear

in this publication, refer to the Regulatory Compliance and Safety Information document that

accompanied this device.

Waarschuwing

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel

kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van

de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard

maatregelen om ongelukken te voorkomen. Voor vertalingen van de waarschuwingen die in

deze publicatie verschijnen, kunt u het document Regulatory Compliance and Safety Information

(Informatie over naleving van veiligheids- en andere voorschriften) raadplegen dat bij dit

toestel is ingesloten.

OL-2181-01

General Safety Precautions and Maintenance Guidelines

General Safety Precautions