Sony A700 Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Fotocamera digitale Sony A700. Sony A700 6. Expodisc custom white balance procedures
Anche per Sony A700: Caratteristiche Manuale (3 pagine), Manuale (35 pagine)

Stampa la pagina
Sony A700 Manuale di avvio rapido
a new setting is registered.
7. If you get the message "Custom WB error" this indicates that you need to
adjust your exposure and reattempt to set your white balance.
8. From the White Balance menu, select (
9. Remove the ExpoDisc, return the camera to auto focus if desired and start
shooting.
Sony A7 R II
1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the "P", "S" or "A"
modes or set the correct manual exposure in "M" mode.
3. From the MENU navigate to the Camera Settings1 screen and select White
Balance and then Custom Setup.
4. Aim the camera in the appropriate direction for the given lighting condition
and press the center of the control wheel. See the ExpoDisc Instruction
Manual for more information on where to aim the camera.
5. After the shutter sound beeps, the calibrated values (ColorTemperature and
Color filter) are displayed.
6. Select a registration number (1-3) using the right/left button. The monitor
returns to the recording information display retaining the memorized custom
white balance setting.
7. If you get the message "Custom WB error" this indicates that you need to
adjust your exposure and reattempt to set your white balance.
8. From the White Balance menu, select the Custom 1 / Custom 2 / Custom 3
depending on where you saved the measurement in step 6.
9. Remove the ExpoDisc, return the camera to auto focus if desired and start
shooting.
Sony A33/A55
1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the "P", "S" or "A"
modes or set the correct manual exposure in "M" mode.
3. Press the WB (White Balance) on the control button to display the White
Balance mode screen.
4. Select (
SET) with the !/" on the control button, then press the center of
the control button.
5. Aim the camera in the appropriate direction for the given lighting condition
and press the shutter release button. See the ExpoDisc Instruction Manual for
more information on where to aim the camera.
6. The shutter clicks and the calibrated values (ColorTemperature and Color
filter) are displayed.
7. Press the center of the control button again. The monitor returns to the
Copyright, 2020 ExpoImaging, Inc.
"Sony" and the Sony camera models listed are trademarks of Sony, Inc.
Custom 1).