Sony Alpha ILCA-77M2 Manuale di servizio - Pagina 8
Sfoglia online o scarica il pdf Manuale di servizio per Fotocamera digitale Sony Alpha ILCA-77M2. Sony Alpha ILCA-77M2 37. Interchangeable lens digital camera
Stampa la pagina
1-7. METHOD FOR REPLACING THE AS SLIDER B ASSY T
Removal Procedure
(1) Remove the spring.
Spring
(2) Remove the solder on the enamel wires at two places.
Solder
Solder
(3) Remove the flexible board from the AS Slider B Assy T.
Flexible Board
(4) Remove the two screws.
(5) Remove the AS Unit Holder Ball.
AS Unit Holder Ball
(6) Remove the two Ball Bearings.
Ball Bearing
Ball Bearing
ILCA-77M2/77M2M/77M2Q_L2
(7) Remove the Cap SPs (for Pitch and Yaw).
Cap SP
(8) Remove the Caps (for Pitch and Yaw).
Cap
(9) Remove the AS Slider A.
It can be done easily if A is removed beforehand.
A
AS Slider A
(10) Remove the AS Slider B Assy T.
It can be done easily if B is removed beforehand.
B
AS Slider B Assy T
(11) Remove the three Ball Bearings.
Ball Bearing
Assembly Procedure
Note: Make sure to perform the assembly procedures after assembling the AS Holder Actuator Assy.
The assembly procedure is the reverse of the removal procedure.
Apply grease to the portions indicated below.
* After applying grease, attach the Ball Bearings.
Ball Bearing
G G-15
G G-15 and G G-116
AS Slider B Assy T
* After applying grease, attach the Ball Bearings.
Ball Bearing
G G-15
Ball Bearing
G G-15
1-4
– ENGLISH –