Cisco Aironet 1430 Series Manuale introduttivo - Pagina 8

Sfoglia online o scarica il pdf Manuale introduttivo per Hardware di rete Cisco Aironet 1430 Series. Cisco Aironet 1430 Series 48. Wireless bridge

Press and hold the power injector's MODE button while you reconnect the power jack.

Step 2

Hold the MODE button until the Status LED turns amber (approximately 1 to 3 seconds) and

Step 3

wait until the bridge boots up (Status LED turns green). All bridge settings return to factory

defaults.

You can also use the web-browser interface to reset the bridge to defaults. Follow these steps to return

to default settings using the web-browser interface:

Step 1

Open your Internet browser. You must use Microsoft Internet Explorer (version 5.x or later)

or Netscape Navigator (version 4.x).

Enter the bridge's IP address in the browser address line and press Enter. An Enter Network

Step 2

Password window appears.

Enter your username in the User Name field. The default username is Cisco.

Step 3

Enter the bridge password in the Password field and press Enter. The default password is

Step 4

Cisco. The Summary Status page appears.

Click System Software and the System Software screen appears.

Step 5

Click System Configuration and the System Configuration screen appears.

Step 6

Click Default.

Step 7

If the bridge is configured with a static IP address, the IP address is not changed.

Note

Obtaining and Assigning an IP Address

To browse to the bridge's Express Setup page, you must either obtain or assign the bridge's IP address

using one of the following methods:

• Use default address 10.0.0.1 when you connect to the bridge locally. For detailed instructions, see

the "Connecting to the Bridge Locally" section on page 9.

• Use a DHCP server (if available) to automatically assign an IP address. You can find the

DHCP-assigned IP address using one of the following methods:

Provide your organization's network administrator with your bridge's Media Access Control

–

(MAC) address. Your network administrator will query the DHCP server using the MAC

address to identify the IP address. The bridge's MAC address is on label attached to the

bottom of the bridge.

THIRD FCC DRAFT (CISCO CONFIDENTIAL)