DIGITEN WTC100 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Termostato DIGITEN WTC100. DIGITEN WTC100 8.
Anche per DIGITEN WTC100: Manuale d'uso (9 pagine), Manuale d'uso (12 pagine)

Stampa la pagina

Manual turn on/off function

Press and hold the M button for 3 seconds, the controller switches to the

manual mode, Always on or Always off will appear on the display. Short press

the M button to turn on/off the device. Long press the M button to exit the

manual control function.

Note: Short press

command from transmitter.

Troubleshoot

1. Current temperature is incorrect.

The remote updates the temperature value every 20 seconds. If you are

using it for the first time, please wait for about 5 minutes before the

measurement is stable.

2. If the current temperature reaches the RUN value，but the power does not

turn on, re-pair the remote with the device.

3. If the heating/cooling device is starting and stopping too frequently increase

the difference between RUN and STOP.

4. Others

4.1. If the probe socket is open: LCD current value shows Err

4.2. If the measured temperature exceeds the measurement range, the

current value shows HH (high temperature), LL (low temperature)

WARRANTY

The DIGITEN products are guaranteed to the original owner for one year

against defects in workmanship and materials. Please contact us:

[email protected]

www.digit-en.com/support

on the receiver to turn on/off loading until it receive