Sony ALT-SA32PC - Wireless Multi-room Music System Manuale di risoluzione dei problemi
Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Impianto stereo Sony ALT-SA32PC - Wireless Multi-room Music System. Sony ALT-SA32PC - Wireless Multi-room Music System 2. To stabilize s-air reception
Anche per Sony ALT-SA32PC - Wireless Multi-room Music System: Garanzia limitata (1 pagine), Specifiche tecniche (2 pagine)
Stampa la pagina
English
To stabilize S-AIR reception
Read the following when S-AIR reception is poor or unstable.
About environments where S-AIR products (S-AIR main unit and sub
unit) are used
S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may
cause lost connection or instability in S-AIR reception.
Electronic equipment influence
The following may cause interference or cross talk.
–
Cellular phones, cordless phones
–
Wireless LAN, personal computers
–
Game machines using radio signals
–
Microwave ovens
Other factors
The following may cause poor reception.
–
Materials or structures, such as walls and floors
–
The location where an S-AIR product is placed
When using S-AIR products, place them as far as possible from the above electronic equipment, or
place where S-AIR reception is stable.
©2009 Sony Corporation Printed in China
4-152-319-11(1)
When S-AIR reception is poor
Check the following.
ALT-SA32PC
Keep cords that are connected to the S-AIR product (power supply cord or other cords) away from the
wireless transceiver and slot.
Keep as much space as possible around S-AIR products.
Avoid placing S-AIR products on top of, or directly below, other electronic equipment.
Avoid placing S-AIR products in a closed rack, metal rack, or under a table.
Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is
the most stable.
Place so that the AIR-PC10T and the S-AIR sub unit are closer.
Place so that S-AIR products are separated from other wireless devices.
Place so that S-AIR products are separated from metal doors or tables.
If you cannot improve S-AIR reception, change the "RF CHANGE" setting. For details, refer to the
operating instructions of each S-AIR product.