Cisco AS5850 Manuale di installazione dell'hardware - Pagina 24
Sfoglia online o scarica il pdf Manuale di installazione dell'hardware per Hardware di rete Cisco AS5850. Cisco AS5850 30. Universal gateways
Anche per Cisco AS5850: Manuale di riferimento rapido (38 pagine)
Stampa la pagina
Field-Replaceable Units
Table 1-11 PEMF MBUS Connector Pin Definitions
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
•
Voltage level and current monitoring
The DC-input power supply is designed to prevent any energy hazard during operation. DC power
is first routed to a circuit breaker, followed by a surge protector. In addition, an isolation diode
circuit protects against possible DC-input failure.
The DC-input power supply monitors analog output voltage and current. The battery side of the DC
input is equipped with a 60A circuit breaker, which trips if current reaches peak parameters for
2 seconds. The DC-input power supply circuits are described in
If a PEMF is not properly seated in the Cisco AS5850 backplane, an electronic circuit, or interlock,
trips a breaker in the PEMF and terminates power to the output connectors. This same interlock
provides reverse polarity protection when the system is powered off.
Cisco AS5850 Universal Gateway Hardware Installation Guide
1-24
Description
Breaker enable
5.15 voltage sense to backplane
5.15 current sense, between PEMFs
5.15 voltage sense return, to backplane
ID_P
ID_0
5.15 volt return, main bus return from backplane
5.15 volt return, main bus return from backplane
5.15 volt return, main bus return from backplane
1.60 volt main power to backplane (2 amps)
Mbus_B_H, DATA
Mbus_B_L, DATA
Return line from pin 1
open
open
48 volt monitor to mbus (not backplane)
48 volt current monitor to mbus (not backplane)
1.60 volt current monitor, internal to PEMF
5.15 volt / 15 amp peak
5.15 volt
5.15 volt
1.6 volt return (2 amp)
Mbus_A_H, DATA
Mbus_A_L, DATA
Chapter 1
Cisco AS5850 Product Overview
Table
1-12.
78-10573-06 0A