Sony LBT-N355KR Manuale di istruzioni per l'uso - Pagina 26

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Impianto stereo Sony LBT-N355KR. Sony LBT-N355KR 32. Compact hi-fi stereo system

Stampa la pagina

continued

Press KARAOKE PON/MPX repeatedly

until "hMPX R" or "hMPX L" appears in

the display (choose right (R) or left (L)/

according to the encoding on your MPX

software).

Then, you can hear the voice through the

microphone and the instruments.

To hear both channels (the

instruments and the recorded

singer's voice)

Press KARAOKE PON/MPX until

"h MPX" disappears from the display and

the effect indicator lights up.

Note

When you select "h MPX", you cannot

activate the audio emphasis (the indicators

of the audio emphasis except of DBFB go

off.) When you want the audio emphasis

back, press EFFECT so that the previous

setting of the audio emphasis before you

press KARAOKE PON/MPX activates

again.

If you press EFFECT (or MUSIC MENU ON/

OFF on the remote) or recall a sound effect

from one of the FILE 1 – 5 buttons

The karaoke mode is cancelled.

To adjust the key control

Press KEY CONTROL ˜ DOWN or n UP.

You can adjust the key higher or lower in

13 steps (–3.0 to 3.0). Each step is a halftone

(0.5).

Connecting Optional

Equipment

For greater enjoyment of your stereo

system, you can connect other components

to the stereo. You can connect :

• surround speakers to the SURROUND

SPEAKER connectors on the rear panel

• a VCR to the VIDEO (AUDIO) IN jacks

• a turntable to the PHONO IN jacks

• headphones to the PHONES jack on the

front panel

To connect surround speakers

1 Connect surround speakers to the right

and left SURROUND SPEAKER

connectors.

2 Press SURROUND so that

"SUR

" appears in the display.

You can create the atmosphere of a

movie theatre or concert hall.

Chapter 6: Additional Features

To connect a VCR

1 Connect a VCR or other video

equipment to the VIDEO (AUDIO) IN

jacks.

2 Press FUNCTION repeatedly until

"VIDEO" appears in the display.

The connected sound source comes

through the speakers.

You can also record the VCR sound.

To connect a turntable

1 Connect the turntable to the PHONO IN

jacks on the rear panel.

2 Press FUNCTION until "PHONO"

appears in the display.

The turntable sound comes through the

speakers.

You can also record the turntable sound.

Note

When you use the turntable, adjusting the

volume high may cause distortion or

howling. This is often caused by the bass

sound from the speakers which vibrate the

floor and air. That vibration could be

picked up by the needle of the turntable,

and produce the distortion or howling. To

avoid distortion or howling, do the

following:

1 Keep some distance between the

speakers and the turntable.

2 Stop using the surround effect.

3 Install the speakers or the turntable on a

firm and solid place.

4 Set DBFB to "DBFB

" or off.

5 Set SUPER WOOFER switch on the

super woofer speaker off.