Argo Wallner OL290 Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Laminator Argo Wallner OL290. Argo Wallner OL290 7.

then start the cold lamination.

5. if the cold lamination is after the „HOt" lamination, please turn the switch to „COLD" to

cool the machine; and wait for 30 minutes then cold lamination could be proceeded.

jam reLease buttOn

Due to the situation of necessary termination during lamination or paper jam, keep pres-

sing on the RELEASE / REVERSE button and pull out the laminated pouches at the same

time, then start the new lamination.

impOrtant nOtes

Select the rightful size of lamination pouch to use as inadequacy to fully cover the

laminating material can cause laminator jam or damage.

not applicable for one side lamination only.

Sensitive paper as fax paper or its similar material can only be proceed with „COLD"

lamination mode.

Do not laminate exceeding the maximum thickness of 0.5mm. Laminating pouch

from 80-125 microns (3-6 mils.) can be used to laminate the standard Din A4 70gsm

paper but suggest to use only the 80 microns pouch for laminating thicker papers or

photos.

Regular maintenance of laminator rollers by use of the specialized cleaning paper can

lessen laminator jam occurrence.

When the laminated material happens to get stuck during the lamination process,

which is unable to be pulled out by RELEASE / REVERSE Button, avoid the dangerous

attempt of trying to open or dismantle the machine by your own.

the machine does not require any maintenance or adjustment. Please do not attempt

to take out the machine casing by yourself. if unusual problem occurs, please contact

our after-sales service centers for the proper repair.

the socket-outlet shall be installed near the equipment and shall be easily accessible.

if wearing a tie or long necklace, use caution to keep these items away from opening.

deFects

in case of any defects, laminating machine should be delivered to the seller or authorized

service together with the warranty and damage description. Equipment should be secured

with proper packaging (preferably original carton box). the seller does not take responsibi-

lity for any consequences of transporting equipment not properly packed.

saFetY instructiOns:

1. Please, read manual carefully.

2. make sure that electric cable does not interfier with usual office traffic.

3. When removing the cover, be carefull to avoid electric shock.

4. Do not use machine when it is wet.

5. Unplug power supply, when equipment is not in use.

6. Do not cover ventilation duct when equipment is in use.

7. Do not touch ventilation duct when the equipment is in use.