Sony MHC-LX10000 - High Power Mini Hi-fi System Manuale di istruzioni per l'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Impianto stereo Sony MHC-LX10000 - High Power Mini Hi-fi System. Sony MHC-LX10000 - High Power Mini Hi-fi System 39. Limited warranty (us only)
Anche per Sony MHC-LX10000 - High Power Mini Hi-fi System: Manuale di istruzioni per l'uso (40 pagine), Scheda tecnica (2 pagine), Specifiche tecniche (2 pagine), Garanzia limitata (1 pagine)
Stampa la pagina
4
Press TUNER MEMORY on the remote.
A preset number
flashes in the display.
The stations are stored from preset
number
i.
Preset number
I..,! ........
r = I,,4
,,, = 1,.
i'i_i'iUr
":_
r"i'i
::i:
G®®
m"=' l"
=_lwe.
_toov_
5
6
7
Turn TUNING +/- clockwise or
counterclockwise
(or press -1_141 or
I_1+
on the remote repeatedly)
to
select the preset number you want.
Press ENTER.
"( omplete!"
appears
in the display. The
station is stored.
Repeat steps 1 to 6 to store other
stations,
Other
operations
To
Do this
Tune in a station
Follow the procedure described
with a weak signal
in "Manual tuning preset" on
page 13
Stop scanning
Press m.
during automatic
tuning
Cancel presetting
Press TUNER MEMORY on
the remote
To
improve
tuner
reception
When tuner reception is poor, set the CD power
nmnage fmlction to "CD POWER
OFF". The
default setting is "CD POWER
ON".
Use buttons
on the unit for the operation.
] Press
CD.
2 Press
I/@ to turn off the system.
3
Press I/@ while holding m.
The system turns on automatically.
"CD
POWER
OFF" appears in the display.
To
set
to "CD
POWER
ON"
Repeat _e procedure
above and "CD POWER
ON" appears in the display.
Notes
• When "CD POWER OFF' is selected, disc access
time is increased
• You cannot change the CD power manage fimction
setting in the Power Saving Mode (page 24)
To
change
the
AM
tuning
interval
Use buttons
on the unit for the operation.
The factory settings for AM tuning interval is
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval,
select any AM station first,
then turn off the system. While holding down
ENTER, press I/0). The system turns on
automatically
and "AM 1Ok STEP" or
"AM 9k STEP" appears in the display. When
you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.
Note
You cannot change the AM tuning intelwal in the
Power Saving Mode (page 24).
Tips
• The preset stations are retained for halfa day even if
you unplug the power cord or ifa power failure
occms
• If you press TL_'qER,'BAND while the system is
turned off, the system turns on automatically and
"TL2XER" is selected as the fimction
• You can also press FUNCTION on the remote
repeatedly to select "TUNER".
14us