Cisco ASA 5515-X Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Hardware di rete Cisco ASA 5515-X. Cisco ASA 5515-X 15. Threat defense reimage guide
Anche per Cisco ASA 5515-X: Manuale di istruzioni per l'installazione (13 pagine), Manuale di avvio rapido (13 pagine), Manuale di configurazione facile (11 pagine), Manuale del software (37 pagine)

Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Quick Start Guide

The Protection (IPS) updates require you to purchase the IPS subscription from http://www.cisco.com/go/ccw. This

subscription includes entitlement to Rule, Engine, Vulnerability, and Geolocation updates.

does not generate or require a PAK/license activation key for the ASA FirePOWER module; it just provides the right to use the

updates.

Other licenses that you can purchase include the following:



Advanced Malware Protection (AMP)



URL Filtering

These licenses do generate a PAK/license activation key for the ASA FirePOWER module. See the

Licenses

for more information.

To install the Control and Protection licenses and other optional licenses, see

3. Power On the ASA

Attach the power cable to the ASA and connect it to an electrical outlet.

The power turns on automatically when you plug in the power cable; do not press the power button on the front panel. (For

older models, the power does not turn on automatically; check the hardware installation guide for more information).

Check the Power LED on the front of the ASA; if it is solid green, the device is powered on.

Check the Status LED on the front of the ASA; after it is solid green, the system has passed power-on diagnostics.

4. Modify the Initial Configuration for the ASA FirePOWER

Module (Optional)

The ASA ships with a default configuration that enables Adaptive Security Device Manager (ASDM) connectivity to the

Management 0/0 interface. When you use a software module such as the ASA FirePOWER module, we recommend that you do

not use the default configuration, which can preclude the ASA FirePOWER module from reaching the Internet for updates. This

section describes how to apply a new configuration so the ASA FirePOWER can access the Internet. This configuration also enables

a basic usable configuration for an inside and outside network.

ASA 9.7 and Later

The following figure shows the recommended network deployment for the ASA 5500-X with the ASA FirePOWER module. This

deployment includes an inside bridge group that includes all but the outside interface so you can use these interfaces as an alternative

to an external switch.

Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Quick Start Guide

Note:

This right-to-use subscription

Cisco Firepower System Feature

Install the Licenses, page

12.

3. Power On the ASA