Sony MHC-V3 Manuale di istruzioni per l'uso - Pagina 19
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Impianto stereo Sony MHC-V3. Sony MHC-V3 36.
Stampa la pagina
Playing music from a
Bluetooth device
You can operate a Bluetooth device by
connecting the system and the Bluetooth
device using AVRCP.
Check the following before playing
music:
– The Bluetooth function of the Bluetooth
device is turned on.
– Pairing has been completed.
1
Press BLUETOOTH on the unit
to select Bluetooth function.
"BT AUDIO" appears in the display
panel.
2
Establish connection with the
Bluetooth device.
Press BLUETOOTH on the unit to
connect to the last connected Bluetooth
device.
Perform the Bluetooth connection
from the Bluetooth device if the device
is not connected.
Once the connection is established, the
Bluetooth device name appears in the
display panel.
3
Press N to start playback.
Depending on the Bluetooth device,
– you may need to press N twice.
– you may need to start playing an
audio source on the Bluetooth
device.
Notes
• When the system is not connected to any
Bluetooth device, the system will connect to
the last connected Bluetooth device
automatically when you press N.
• If you try to connect another Bluetooth device
to the system, the current connected Bluetooth
device will be disconnected.
To disconnect the Bluetooth device
Press BLUETOOTH on the unit.
"BT AUDIO" appears in the display
panel.
Depending on the Bluetooth device, the
Bluetooth connection may be canceled
automatically when you stop playback.
Erasing all the pairing
registration information
Use the buttons on the unit to perform this
operation.
1
Press BLUETOOTH to select
Bluetooth function.
"BT AUDIO" appears in the display
panel.
If the system is connected to a
Bluetooth device, the Bluetooth device
name appears in the display panel.
Press BLUETOOTH to disconnect the
Bluetooth device.
2
Hold down x and DJ EFFECT for
about 3 seconds.
"BT HIST CLEAR" appears in the
display panel and all the pairing
information is erased.
Setting the Bluetooth
standby mode
The Bluetooth standby mode enables the
system to turn on automatically when you
establish the Bluetooth connection from a
Bluetooth device.
Use the buttons on the unit to perform this
operation.
1
Press OPTIONS.
2
Press V/v repeatedly to select
"BT STBY", then press ENTER.
19
GB