Sony RDH-GTK17iP Manuale di istruzioni per l'uso - Pagina 28

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Impianto stereo Sony RDH-GTK17iP. Sony RDH-GTK17iP 36. Personal audio system

Stampa la pagina

Sony RDH-GTK17iP Manuale di istruzioni per l'uso

Playback does not start from the first

file.

• Set the play mode to Normal Play

(page 15).

Audio file cannot be played back.

• MP3 files in MP3 PRO format cannot be

played back.

• Some AAC files may not be played back

correctly.

• An AAC file which has video stream

cannot be played back.

• WMA files in Windows Media Audio

Lossless and Professional format cannot

be played back.

• USB device formatted with file systems

other than FAT16 or FAT32 are

unsupported.*

• If you use a partitioned USB device,

only files on the first partition can be

played.

• The system can play back to a depth of

8 folders only.

• Files that are encrypted or protected by

passwords and etc. cannot be played

back.

• Files with DRM (Digital Rights

Management) copyright protection

cannot be played back by this system.

* This system supports FAT16 and FAT32, but

some USB device may not support all of these

FAT. For details, refer to the operating

instructions of each USB device or contact the

manufacturer.

Bluetooth device

Pairing cannot be done.

• Move the Bluetooth device closer to the

system.

• Pairing may not be possible if other

Bluetooth devices are present around the

system. In this case, turn off the other

Bluetooth devices.

• Make sure the correct passkey was

entered at the Bluetooth device.

Connection is not possible.

• The Bluetooth device you attempted to

connect does not support the A2DP

profile, and cannot be connected with

the system.

• Enable the Bluetooth function of the

Bluetooth device.

• Establish a connection from the

Bluetooth device.

• The pairing registration information has

been erased. Perform the pairing

operation again.

• While connected to a Bluetooth device,

this system cannot be detected and a

connection cannot be established from

another Bluetooth device which is never

paired before.

• Erase the pairing registration

information of a Bluetooth device and

perform the pairing operation again.

The sound skips or fluctuates, or the

connection is lost.

• The system and the Bluetooth device are

too far apart.

• If there are obstacles between the

system and your Bluetooth device,

remove or avoid the obstacles.

• If there is equipment that generates

electromagnetic radiation, such as a

wireless LAN, other Bluetooth device,

or a microwave oven nearby, move

them away.

The sound of your Bluetooth device

cannot be heard on this system.

• Increase the volume on your Bluetooth

device first, and then adjust the volume

using VOLUME +/–.

There is severe hum, noise or

distorted sound.