Sony SS-GSX100 Manuale di istruzioni per l'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Impianto stereo Sony SS-GSX100. Sony SS-GSX100 44. Sony operating instructions mini hi-fi component system mhc-gsx100w, mhc-gsx75

Stampa la pagina

C To connect to TV, etc.

If noise occurs when the transmitter is

connected to the headphones jack of your

TV or VCR, set the NOISE FILTER switch

on the transmitter to ON.

Transmitter

OFF ON

NOISE

FILTER

Right channel

(red)

Connect the transmitter to a wall outlet

using the supplied AC power adaptor.

The transmitter automatically turns on.

to DC IN 9V

jack

Notes

• When you connect the transmitter to the analog out

jacks, do not set the NOISE FILTER to ON.

Otherwise, the volume will be limited.

• The NOISE FILTER effects the sound only in case of

such as connections B and

the switch has no effect.

DC IN 9V

1 2 3

AUDIO IN

CHANNEL

to AUDIO IN A jacks

Left channel

(white)

Connecting cord

(supplied)

to stereo mini jack

TV, VCR, etc.

Transmitter

to wall outlet

AC power adaptor

(supplied: AC-GSX100)

. In connection A,

• For connections B and

connected to line out and the NOISE FILTER is set

to ON, audio output will be reduced and audio signal

may be intermittent or auto muting will activate. In

this case, set the NOISE FILTER to OFF.

• When the transmitter is placed on or near a TV, it

may pick up a noise. In such case, place the

transmitter away from the TV.

• Use only the supplied AC power adaptor. Do not use

any other AC power adaptor.

Polarity of the plug

• If the connected component has the AVLS

(Automatic Volume Limiter System) function, be

sure to turn off the function when using the

transmitter. Otherwise, you will have to turn up the

volume of the speaker, and that may cause distortion.

• If the connected component has the BASS BOOST

or MEGA BASS function, be sure to turn off the

function when using the transmitter. Otherwise, the

sound from the speaker may be distorted.

• Do not place the transmitter near a fluorescent lamp,

etc. when using the system.

• When the source audio level is low or no audio signal

is input for 10 seconds or more, the transmitter will

switch to auto muting mode.

• If the transmitter does not detect an audio signal for

a few minutes, the power on the transmitter

automatically turns off. When the transmitter

receives an audio signal again, the power

automatically turns on.

The effective areas of the

transmitter

Wireless system that allows you to use your

system free from the restriction of speaker cords.

The optimum signal reception range is up to

approximately 150 feet (46m) without the

system picking up some interference. However,

the distance may be reduced according to the

surroundings and environment. If the system

picks up some noise while using it within the

above mentioned distance, reduce the distance

between the transmitter unit and the main unit,

or select another channel.

, if stereo mini jack is