Sony WHG-CX5iP Istruzioni per l'uso - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'uso per Impianto stereo Sony WHG-CX5iP. Sony WHG-CX5iP 2. Audio system component
Stampa la pagina
To change the play mode
Playing the iPod/iPhone
Press PLAY MODE
repeatedly. You can select Normal
Play mode (playback in sequence of all files on the
1
USB device), Folder Play mode ("
Select the iPod function.
specified folder on the USB device), or Shuffle Play mode
Press FUNCTION +/
repeatedly.
("SHUF").
2
Place the iPod/iPhone.
Notes on the play mode
3
Start playback.
When you select Shuffle Play mode "SHUF, " the system shuffle-plays
all audio files in the connected USB device in random order. Shuffle
Press
.
Play mode may play the same file repeatedly.
When the play mode is set to Folder Play mode, "REP1" is not
To control the iPod/iPhone
available.
To
Press
When the play mode is set to Shuffle Play mode, the repeat function
is not available.
Pause playback
(pause) / (stop)
.
When repeat play is set, Shuffle Play mode is not available. When
Select a track
(go back)/ (go forward)
repeat play is set to "REP1, " Folder Play mode is not available.
or chapter of
. To fast-forward or fast-rewind,
When you turn off the system, the selected Shuffle Play mode
("SHUF") is cleared and the play mode returns to Normal Play
audiobook/
hold down the button.
mode.
podcast
Note on Repeat play
Hold down (rewind)/ (fast
Find a point in a
If you select "REP" when the system is in Normal Play mode, the
track or chapter
forward)
during playback, and
system executes repeat play of all audio files in the USB device until
of audiobook/
release the button at the desired
you stop playback. If you select "REP" when the system is in Folder
podcast
point.
Play mode, the system executes repeat play of all audio files in the
selected folder until you stop playback.
Choose the
(enter)
.
selected item
Notes
Scroll up/down
/
.
When USB cable connection is necessary, connect the USB cable
supplied with the USB device to be connected. See the operation
the iPod menus
manual supplied with the USB device to be connected for details on
Return to the
TOOL MENU /RETURN
the operation method.
previous menu or
(return)
.
It may take about 10 seconds before "Reading" appears depending
on the type of USB device connected.
select a menu
Do not connect the system and the USB device through a USB hub.
When the USB device is inserted, the system reads all the files on the
To use the system as a battery charger
USB device. If there are many folders or files on the USB device, it
may take a long time to finish reading the USB device.
You can use the system as a battery charger for an iPod/
With some connected USB devices, after an operation is performed,
iPhone whether the system is on or off.
there may be a delay before it is performed by this system.
The charging begins when the iPod/iPhone is placed on
Compatibility with all encoding/writing software cannot be
the iPod/iPhone connector
. The charge status appears
guaranteed. If audio files on the USB device were originally encoded
in the iPod/iPhone display. When charging the iPod/
with incompatible software, those files may produce noise or
interrupted sound, or may not be played back at all.
iPhone, place the iPod/iPhone on the connector with the
This system cannot play audio files on the USB device in the
iPod/iPhone player stopped.
following cases;
For details, see the user's guide of your iPod/iPhone.
when the total number of audio files in a folder exceeds 100.
when the total number of audio files on a USB device exceeds
To stop charging an iPod/iPhone
10000.
Remove the iPod/iPhone.
when the total number of folders on a USB device exceeds 100
(including the "ROOT" folder and empty folders).
Notes on charging an iPod/iPhone
These numbers may vary depending on the file and folder structure.
When a USB function is selected while the system is on, you cannot
Do not save other types of files or unnecessary folders on a USB
charge an iPod/iPhone.
device that has audio files.
If the display mode is Demonstration or Clock, you cannot charge
The system can play back to a depth of 8 folders only.
an iPod/iPhone even if the system is off.
This system does not necessarily support all the functions provided
If charging an iPod/iPhone when the system is off, after charging is
in a connected USB device.
complete the system automatically enters Power Saving mode. The
Folders that have no audio files are skipped.
maximum charging time while the system is off is about 4 hours.
The audio formats that you can listen to with this system are as
If you press DISPLAY
while charging when the system is off,
follows:
the system stops charging an iPod/iPhone. To restart charging of an
MP3: file extension ".mp3"
iPod/iPhone, reconnect the iPod/iPhone when the display mode is
WMA: file extension ".wma"
Power Saving mode.
AAC: file extension ".m4a"
Notes
Note that even when file name has the correct file extension, if the
actual file differs, the system may produce noise or may malfunction.
If the battery of the iPod/iPhone is empty, the system may not
recognize it. In such a case, recharge it with a computer, etc. then
To use the system as a battery charger
connect it to the system.
The performance of the system may be vary, depending on the
You can use the system as a battery charger for USB
specifications of your iPod/iPhone.
devices that have a rechargeable function when the
When placing or removing the iPod/iPhone, handle the iPod/iPhone
system is on.
in the same angle as that of the iPod/iPhone connector on the unit
Press FUNCTION +/
repeatedly to select the USB
and do not twist or sway the iPod/iPhone to prevent connector
damage.
function.
Do not carry the unit with an iPod/iPhone set on the connector.
The charging begins when the USB device is connected
Doing so may cause a malfunction.
to the
(USB) port
. The charge status appears in
When placing or removing the iPod/iPhone, brace the unit with one
the USB device display. For details, see the user's guide of
hand and take care not to press the controls of the iPod/iPhone by
your USB device.
mistake.
Before disconnecting the iPod/iPhone, pause playback.
Hold down /
to fast-forward (fast-rewind) while
playing video if /
does not function.
Using optional audio components
When the iPhone is connected to the system and you receive a call
during playback, playback will pause and you can take an incoming
call.
1
Prepare the sound source.
To change the volume level, use VOLUME +/
. The volume level
does not change if you adjust it on the iPod/iPhone.
Connect additional audio component to the AUDIO
This system is designed for iPod/iPhone only. You cannot connect
IN jack
on the unit using an audio analog cord
any other portable audio players.
(not supplied).
To use an iPod/iPhone, refer to the user's guide of your iPod/iPhone.
2
Sony cannot accept responsibility in the event that data recorded to
Turn down the volume.
iPod/iPhone is lost or damaged when using an iPod/iPhone with
Press VOLUME
.
this unit.
3
Select the AUDIO IN function.
Press FUNCTION +/
repeatedly.
Playing a file of the USB device
4
Start playback.
Start playback of the connected component and adjust
The audio format that can be played back on this system
the volume.
is MP3/WMA*/AAC*.
*
Files with DRM (Digital Rights Management) copyright protection
Note
or files downloaded from an online music store cannot be played
The system may enter Standby mode automatically if the volume
on this system. If you try to play one of these files, the system plays
level of the connected component is too low. Adjust the component's
the next unprotected audio file.
volume accordingly. See "To turn off the Automatic Standby function. "
Check the websites below for the information about
compatible USB devices.
<http://www.sony-latin.com/index.crp>
1
Select the USB function.
Press FUNCTION +/
repeatedly.
2
Connect the USB device to the
(USB) port
.
3
Start playback.
Press
.
Other operations
To
Press
Pause playback
(pause)
. To resume play, press
the button again.
(stop)
Stop playback
. To resume play, press
(play)
*
. To cancel resume
1
play, press
again*
2
.
Select a folder
+/
repeatedly.
Select a file
(go back)/ (go forward)
.
Find a point in
Hold down (rewind)/ (fast
a file
forward)
during playback, and
release the button at the desired
point.
Select Repeat Play REPEAT
repeatedly until "REP"
or "REP1" appears.
*
1
When playing a VBR MP3/WMA file, the system may resume
playback from a different point.
*
2
Resume play returns to the top folder.
To change the setting
Adjusting the sound
Start over from step 1.
Note
" for all files in the
To
Press
If you select a USB device as a timer and have many files or folders
Adjust the volume VOLUME +/
.
on that device, it takes time for read processing, causing a slight delay
before start of play in response to the timer.
DSGX on the unit.
Generate a more
dynamic sound
Notes for the iPod/iPhone user
Make sure the iPod/iPhone is not playing when using the Play
(Dynamic Sound
Timer.
Generator X-tra)
The Play Timer may not be activated depending on the status of the
Set the sound
EQ
repeatedly to select "BASS"
connected iPod/iPhone.
effect
or "TREBLE, " and then press /
Tip
to adjust the level.
The Play Timer setting remains as long as the setting is not cancelled
manually.
Changing the display
Troubleshooting
To
Press
Change
DISPLAY
repeatedly when the
1
Make sure the power cord and speaker cords are
information on
system is on.
correctly and firmly connected.
the display
1)
2
Find your problem in the checklist below, and take
Change Display
DISPLAY
repeatedly when the
the indicated corrective action.
mode (see below.)
system is off.
2)
If the issue persists, contact your nearest Sony dealer.
1)
For example, you can view CD/MP3 disc information or the USB
device information, such as;
If the STANDBY indicator flashes
track or file number
track or file name ("
")
Immediately unplug the power cord, and check the
artist name (" ")
following items.
album or folder name ("
")
Are the + and speaker cords short-circuited?
total playing time and total number of tracks on the CD-DA
Is anything blocking the ventilation holes of the
disc (only when Normal Play mode is selected and the player is
stopped).
system?
total number of folders (albums) on the MP3 disc (only when
Is the iPod/iPhone connector
Normal Play mode is selected and the player is stopped).
After the STANDBY indicator
volume label if it exists on the MP3 disc (only when Normal Play
reconnect the power cord, and turn on the system. If
mode is selected and the player is stopped).
the issue persists, contact your nearest Sony dealer.
2)
The STANDBY indicator
on the unit lights up when the system is off.
The system offers the following display modes.
General
Display mode
When the system is off
1)
Demonstration
The demonstration is turned on.
The demonstration appears in the display after
Power Saving
The display is turned off to conserve
plugging in the power cord even though the
mode
2)
power. The timer and clock continue
system is not turned on.
to operate.
Press DISPLAY
Clock
3)
The clock is displayed.
demonstration disappears.
1)
The STANDBY indicator
on the unit lights up when the system is off.
The system does not turn on.
2)
You cannot set the clock in Power Saving mode.
Is the power cord plugged in?
The clock display automatically turns to Power Saving mode after 8
3)
seconds.
The system has entered Standby mode
Notes on the display information
unexpectedly.
Characters that cannot be displayed appear as "_".
This is not a malfunction. The system enters Standby
The following are not displayed;
total playing time for an MP3 disc and a USB device.
mode automatically in about 30 minutes when there is
remaining playing time, except in the case of CDDA.
no operation or audio signal output. See "To turn off
The following are not displayed correctly;
the Automatic Standby function. "
elapsed playing time of an MP3 file encoded using VBR (variable
bit rate).
The clock setting or the Play Timer operation
folder and file names that do not follow either the ISO9660
has been cancelled unexpectedly.
Level 1, Level 2 or Joliet in the expansion format.
If about a minute elapses with no operation, the clock
The following are displayed;
setting or Play Timer setting is cancelled automatically.
remaining playing time for a CDDA disc track.
Perform the operation again from the beginning.
ID3 tag information for MP3 files when ID3 version 1 and
version 2 tags are used (ID3 version 2 tag information display has
There is no sound.
priority when both ID3 version 1 and version 2 tags are used for a
single MP3 file).
Are the + and speaker cords short-circuited?
Are you using only the supplied speakers?
Is anything blocking the ventilation holes of the system?
Using the timers
The specified station may have temporarily stopped
broadcast.
The system offers 2 timer functions. If you use both
timers, the Sleep Timer has priority.
Sound comes from one channel, or the left and
right volumes are unbalanced.
Sleep Timer:
Place the speakers as symmetrically as possible.
You can fall asleep to music. This function works even if
Connect only the supplied speakers.
the clock is not set.
Press SLEEP
repeatedly.
Severe hum or noise.
Move the system away from sources of noise.
Play Timer:
Connect the system to a different wall outlet.
You can wake up to CD, FM reception, iPod/iPhone or
Install a noise filter (not supplied) to the power cord.
USB device at a preset time. Make sure you have set the
clock.
The remote does not function.
1
Prepare the sound source.
Remove any obstacles between the remote and the
Prepare the sound source, and then press VOLUME
remote sensor
+/ to adjust the volume.
away from fluorescent lights.
To start from a specific CD track or audio file, create
Point the remote at the system's sensor.
your own program.
Move the remote closer to the system.
2
Select the timer set mode.
The STANDBY indicator
Press TIMER MENU
.
unplugging the power cord.
3
Set the play timer.
The STANDBY indicator
Press /
repeatedly to select "PLAY SET?, " then
immediately after unplugging the power cord. The
press
.
indicator will turn off after about 40 seconds. This is not
a malfunction.
4
Set the time to start playback.
Press /
repeatedly to set the hour, then press
CD/MP3 player
. Use the procedure above to set the minutes.
5
The sound skips, or the disc will not play.
Use the same procedure as in step 4 to set the time
to stop playback.
Wipe the disc clean, and replace it.
Move the system to a location away from vibration (for
6
Select the sound source.
example, on top of a stable stand).
Press /
repeatedly until the desired sound
Move the speakers away from the system, or place them
source appears, then press
.
on separate stands. At high volume, speaker vibration
7
Turn off the system.
may cause the sound to skip.
Press
. The system automatically turns on
Play does not start from the first track.
before the preset time.
Return to normal play by pressing PLAY MODE
If the system is on at the preset time, the Play Timer
repeatedly until both "PGM" and "SHUF" disappear.
will not play. Do not operate the system from the time
the system turns on until the playback starts.
Starting playback takes more time than usual.
The following discs can increase the time it takes to
To check the setting
start playback;
1
Press TIMER MENU
.
a disc recorded with a complicated tree structure.
2
a disc recorded in multisession mode.
Press /
repeatedly to select "TIMER SEL?, " and
then press
.
a disc that has not been finalized (a disc to which data
can be added).
3
Press /
repeatedly to select "PLAY SEL?, " and
a disc that has many folders.
then press
.
To cancel the timer
Repeat the same procedure as above until "TIMER OFF?"
appears in step 3, and then press
.
iPod/iPhone
There is no sound.
Make sure the iPod/iPhone is connected securely.
Make sure the iPod/iPhone is playing music.
Make sure the iPod/iPhone is updated with the latest
software. If not, update the iPod/iPhone before using
with the system.
Adjust the volume.
The sound is distorted.
Make sure the iPod/iPhone is connected securely.
Turn down the volume.
Set the "EQ" setting of the iPod/iPhone to "Off " or
"Flat. "
The iPod/iPhone does not function.
If the battery of the iPod/iPhone is empty, it may not
work with this system. In such a case, recharge it with a
computer, etc. then connect it to the system.
Shut down any other iOS applications running on the
iPod/iPhone. For details, refer to the operation manual
supplied with the iPod/iPhone.
Make sure the iPod/iPhone is connected securely.
Make sure the iPod/iPhone is updated with the latest
software. If not, update the iPod/iPhone before using
with the system.
Because the operation of the system and the iPod/
iPhone are different, you may not operate the iPod/
iPhone using buttons on the remote or unit. In this
case, use the control buttons on the iPod/iPhone.
The iPod/iPhone cannot be charged.
short-circuited?
If the battery of the iPod/iPhone is empty, the system
stops flashing,
may not be able to charge it even if you connect it to the
system. In such a case, recharge it with a computer, etc.
then connect it to the system.
Make sure the iPod/iPhone is connected securely.
When charging an iPod/iPhone when the system is off
(Standby mode), the system does not perform charging
if the iPod/iPhone is fully charged.
Make sure the system is not in USB function mode. An
iPod/iPhone cannot be charged in USB function mode.
You cannot charge the iPod/iPhone even if you connect
once while the system is off. The
the USB cable supplied with your iPod/iPhone to the
USB connector on the system.
The ring volume of the iPhone does not
change.
Adjust the ring volume on the iPhone.
USB device
The connected iPod/iPhone or USB device is
not being charged, when both are connected at
the same time.
You cannot charge an iPod/iPhone and the USB device
at the same time. Select the USB function to charge a
USB device.
Are you using a supported USB device?
If you connect an unsupported USB device, the
following problems may occur. Check the information
on the websites about compatible USB devices with
URLs listed under "Playing a file of the USB device. "
The USB device is not recognized.
File or folder names are not displayed on this system.
Playback is not possible.
The sound skips.
There is noise.
A distorted sound is output.
There is no sound.
The USB device is not connected correctly. Turn off the
system, then reconnect the USB device.
There is noise, skipping, or distorted sound.
Turn off the system, then reconnect the USB device.
The music data itself contains noise, or the sound is
distorted. Noise may have been entered when creating
music data due to the conditions of the computer.
on the unit, and position the unit
Create the music data again.
The bit rate used when encoding the files was low. Send
files encoded with higher bit rates to the USB device.
"Reading" is displayed for an extended time, or
remains lit after
it takes a long time before playback starts.
The reading process can take a long time in the
may not turn off
following cases.
There are many folders or files on the USB device.
Th e file structure is extremely complex.
The memory capacity is excessive.
The internal memory is fragmented.
Erroneous display
Send the music data to the USB device again, as the
data stored in the USB device may have been corrupted.
The character codes that can be displayed by this
system are numbers and alphabets only. Other
characters are not displayed correctly.
The USB device is not recognized.
Turn off the system and reconnect the USB device, then
turn on the system.
Check the information on the websites about
compatible USB devices with URLs listed under
"Playing a file of the USB device. "
The USB device does not work properly. Refer to the
USB device operation manual for how to deal with this
problem.
Play does not start.
Turn off the system and reconnect the USB device, then
turn on the system.
Check the information on the websites about
compatible USB devices with URLs listed under
"Playing a file of the USB device. "
Press
to start playback.
Play does not start from the first track.
Precautions
Set the play mode to Normal Play mode.
Files cannot be played back.
The audio file does not have the extension ".mp3, "
Discs that this system CAN play
".wma" or ".m4a".
Audio CD
The data is not stored in MP3/WMA/AAC format.
CD-R/CD-RW (audio data/MP3 files)
USB storage devices formatted with file systems other
Discs that this system CANNOT play
than FAT16 or FAT32 are unsupported.*
If you use a partitioned USB storage device, only files
CD-ROM
on the first partition can be played.
CD-R/CD-RW other than those recorded in music CD
Files that are encrypted or protected by passwords, etc.
format or MP3 format conforming to ISO9660 Level
cannot be played back.
1/Level 2, Joliet
* This system supports FAT16 and FAT32, but some USB storage
CD-R/CD-RW recorded in multisession that have not
devices may not support all of these FAT. For details, see the
ended by "closing the session"
operation manual of each USB storage device or contact the
CD-R/CD-RW of poor recording quality,
manufacturer.
CD-R/CD-RW that have scratches or are dirty,
or CD-R/CD-RW recorded with an incompatible
Tuner
recording device
CD-R/CD-RW which is finalized incorrectly
Severe hum or noise, or stations cannot be
Discs containing files other than MPEG 1 Audio Layer-
received. ("TUNED" or "STEREO" flashes on the
3 (MP3) files
display.)
Discs of non-standard shape (for example, heart,
Connect the antenna properly.
square, star)
Find a location and an orientation that provide good
Discs that have adhesive tape, paper, or sticker attached
reception, and then set up the antenna again.
to them
Keep the antennas away from the speaker cords and the
Rental or used discs with attached seals where the glue
power cord to avoid picking up noise.
extends beyond the seal
Turn off nearby electrical equipment.
Discs that have labels printed using ink that feels tacky
when touched
To reset the system to factory settings
Notes on discs
If the system still does not operate properly, reset the
system to factory settings.
Before playing, wipe the disc with a cleaning cloth from
Use buttons on the unit to reset the unit to its factory
the center out to the edge.
default settings.
Do not clean discs with solvents, such as benzine,
thinner, or commercially available cleaners or anti-
1
Disconnect and reconnect the power cord, and then
static spray intended for vinyl LPs.
turn on the system.
Do not expose discs to direct sunlight or heat sources
2
Press and hold and FUNCTION
on the unit
such as hot air ducts, nor leave it in a car parked in
for 3 seconds or longer.
direct sunlight.
All user-configured settings, such as preset radio
On safety
stations, timer, and the clock, are deleted.
Completely disconnect the power cord (mains lead)
To turn off the Automatic Standby function
from the wall outlet (mains) if it is not going to be used
for an extended period of time. When unplugging the
This system is equipped with an Automatic Standby
unit, always grip the plug. Never pull the cord itself.
function. With this function, the system enters Standby
Should any solid object or liquid get into the system,
mode automatically in about 30 minutes when there is no
unplug the system, and have it checked by qualified
operation or audio signal output.
personnel before operating it again.
By default, the Automatic Standby function is turned on.
The AC power cord can be changed only by a qualified
Use buttons on the unit to turn off the Automatic
service facility.
Standby function.
Hold down
while the system is on, until
On placement
"AUTO STBY OFF" appears.
Do not place the system in an inclined position or in
To turn on the function, repeat the procedure until
locations that are extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation, or subject to
"AUTO STBY ON" appears.
vibration, direct sunlight or a bright light.
Notes
Be careful when placing the unit or speakers on
"AUTO STBY" appears in the display for 2 minutes before the
surfaces that have been specially treated (for example,
system enters Standby mode.
with wax, oil, polish) as staining or discoloration of the
The Automatic Standby function is invalid for the tuner function
(FM), even when you have enabled it.
surface may result.
The system may not enter Standby mode automatically in the
If the system is brought directly from a cold to a warm
following cases;
location or is placed in a very damp room, moisture
while an audio signal is being detected.
may condense on the lens inside the CD player, and
during playback of audio tracks or files.
cause the system to malfunction. In this situation,
while the preset Play Timer or Sleep Timer is in process.
remove the disc, and leave the system turned on for
about an hour until the moisture evaporates.
Messages
On heat buildup
Heat buildup on the unit during operation is normal
and is not cause for alarm.
CD Over : You have reached the end of the disc while
Do not touch the cabinet if it has been used
pressing
during playback or pause.
continuously at a high volume because the cabinet may
Error : The USB device could not be recognized or an
have become hot.
unknown device is connected.
Do not obstruct the ventilation holes.
LOCKED : The disc slot does not work. Contact your
On the speaker system
nearest Sony dealer.
This speaker system is not magnetically shielded, and
No Device : No USB device is connected or the
the picture on nearby TV sets may become magnetically
connected USB device has been stopped.
distorted. In this situation, turn off the TV, wait 15 to
No Disc : There is no disc in the player, or you have
30 minutes, and turn it back on.
loaded a disc that cannot be played.
If there is no improvement, move the speakers far away
No Memory : The memory media is not inserted in the
from the TV.
USB device.
No Step : All of the programmed tracks have been
Cleaning the cabinet
erased.
Clean this system with a soft cloth slightly moistened
No Track : Playable file on the USB device is not loaded
with a mild detergent solution. Do not use any type of
in the system.
abrasive pads, scouring powder, or solvents, such as
Not in Use : You tried to perform a specific operation
thinner, benzine, or alcohol.
under conditions where that operation is prohibited.
Not Supported : An unsupported USB device or iPod is
connected or the iPod/iPhone whose battery is empty
is connected.
Push STOP! : You pressed PLAY MODE
during
playback in the CD function.
Step Full! : You tried to program more than 25 tracks or
files (steps).
TIME NG! : The Play Timer start and end times are set to
the same time.
Specifications
Amplifier section
Power output (rated): 15 watts + 15 watts (8 ohms at 1 kHz, 1 % THD)
RMS power output (reference): 25 watts + 25 watts (per channel at 8 ohms,
1 kHz)
Input
AUDIO IN (stereo mini jack): Sensitivity 700 mV, impedance 47 kilohms
Outputs
SPEAKERS: Accepts impedance of 8 ohms
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6µW
* This output is the value measurement at a distance of 200mm from the
objective lens surface on the Optical Pick-up Block with 7mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Tuner section
FM stereo, FM superheterodyne tuner
Tuning range:
87.5 MHz 108.0 MHz (50 kHz step)
Antenna: FM lead antenna
iPod/iPhone section
Compatible iPod/iPhone models:
iPod touch 4th generation
iPod touch 3rd generation
iPod touch 2nd generation
iPod touch 1st generation
iPod nano 6th generation
iPod nano 5th generation (video camera)
iPod nano 4th generation (video)
iPod nano 3rd generation (video)
iPod nano 2nd generation (aluminum)
iPod classic
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
"Made for iPod, " and "Made for iPhone" mean that an electronic accessory has
been designed to connect specifically to iPod or iPhone, respectively, and has
been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accessory with iPod
or iPhone may affect wireless performance.
USB section
Supported bit rate:
MP3 (MPEG 1 Audio Layer-3): 32 kbps 320 kbps, VBR
WMA: 48 kbps 192 kbps, VBR
AAC: 48 kbps 320 kbps
Sampling frequencies:
MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
(USB) port: Type A, maximum current 500 mA
Speaker
Speaker system: 2 way speaker system, Bass reflex
Speaker units:
Woofer 80 mm, cone type
Tweeter 40 mm, cone type
Rated impedance: 8 ohms
Dimensions (W/H/D):
Approx. 140 mm × 245 mm × 103 mm
Mass: Approx. 1.2 kg net per speaker
Quantity: 2 pieces (left/right)
General
Power requirements:
AC adapter
Input: 100 V 240 V AC, 50/60 Hz
Output: DC 19.5 V 3.9A
Power consumption: 28 watts
Dimensions (W/H/D) (excl. speakers):
Approx. 250 mm × 245 mm × 130 mm
Mass (excl. speakers): Approx. 2.2 kg
Quantity of the main unit: 1 piece
Supplied accessories: Stand (1), Remote Commander (1), AC adapter (1),
Power cord (1), FM lead antenna (1), Pads for hanging on wall (1 sheet),
Dock Adapters for iPhone models (1 set)
Design and specifications are subject to change without notice.
Standby power consumption: 0.5 W