Sony ZS-X1 - Cd Boombox Istruzioni per l'uso - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'uso per Impianto stereo Sony ZS-X1 - Cd Boombox. Sony ZS-X1 - Cd Boombox 2. Personal audio system
Anche per Sony ZS-X1 - Cd Boombox: Specifiche tecniche (2 pagine), Manuale di istruzioni per l'uso (10 pagine)
Stampa la pagina
Location of controls
Loading a CD
With the labeled side up
Note
When inserting a CD, place the player horizontally.
If the player is not level, you cannot open or close the CD compartment lid.
OPR/BATT
DISPLAY/ENT
MEMORY
POWER
BAND
AUTO PRESET
Display
C
Total track number
Total playing time
To turn on/off the power
Press POWER.
To adjust the volume
Press VOL +, –.
To listen through headphones
Connect the headphones to the i (headphones) jack.
Adjusting the sound emphasis
To reinforce the bass sound
Press MEGA BASS.
"MEGA BASS" appears in the display.
To return to normal sound, press the button again.
ESP indicator
ESP
MODE
Z PUSH
OPEN/CLOSE
x
DC IN 9V
i
u*
VOL –, +*
Display
MEGA BASS
*The button has a tactile dot.
D
Programmed track
Playing a CD
1
Press POWER to turn on the player.
2
Load a CD in the CD compartment.
3
Press PUSH ZOPEN/CLOSE to close the CD compartment.
4
Press u.
The player plays all the tracks once.
To
stop playback
pause playback
go to the next track
go back to the previous track
remove the CD
locate a point while listening
to the sound
locate a point while observing
the display
Using the display
To check the total track number and playing time
Press DISPLAY/ENT/MEMORY in stop mode (see fig. C).
To check the remaining time
Press DISPLAY/ENT/MEMORY repeatedly while playing a CD. The display changes as
follows:
t the current track number and playing time
r
the current track number and the remaining time on the current track*
r
the number of tracks left and remaining time on the CD
* For a track whose number is more than 20, the remaining time appears as "- -:- -" in the display.
Selecting the play mode
Press MODE until "REP 1" "REP ALL" "SHUF" "SHUF REP" "PGM" "PGM
REP" appears in the display. Then proceed as follows:
To
Select
repeat a single track
"REP 1"
repeat all tracks
"REP ALL"
Playing order
shuffle play
"SHUF"
repeat tracks
"SHUF REP"
in random order
program play
"PGM"
repeat programed tracks
"PGM REP"
To cancel selected play mode
Press MODE until the selected mode disappears from the display.
To check the programmed track and playing order in the display
To check the order of tracks before play, press DISPLAY/ENT/MEMORY.
Every time you press the button, the track number appears in the programed order.
To change the current programme
Press x once if the CD is stopped and twice if the CD is playing. The current program will be
erased. Then create a new program following the programing procedure.
Preventing sound from skipping
The ESP (Electronic Shock Protection) function prevents the sound from skipping by using a
buffer memory that stores music data for about 10 seconds.
Press ESP in stop mode.
The ESP indicator lights up.
To cancel the ESP function
Press ESP again.
Press
Notes
x
• Playing may stop when the player gets a strong shock even with the ESP function on.
u
• You may hear a noise or sound skip:
Press the button again to resume play after pause.
– when you listen to a dirty or scratched CD.
>
– when you listen to an audio test CD.
.
– when the player receives continuous shock.
PUSH ZOPEN/CLOSE
• Sound may drop for a while if you press ESP during play.
> (forward) or . (backward) while playing until you
Tip
find the point
To enjoy the high quality sound of an audio CD, we recommend that you cancel the ESP function.
> (forward) or . (backward) in pause until you find
the point
Listening to the radio
1
Press POWER to turn on the player.
2
Press BAND•AUTO PRESET until the band you want appears in the display.
Each time you press the button, the indication changes as follows:
"FM" t "AM".
3
Hold down TUNE + or TUNE – until the frequency digits begin to change in the
display.
The player automatically scans the radio frequencies and stops when it finds a
clear station.
If you can't tune in a station, press TUNE + or TUNE – repeatedly to change the
frequency step by step.
Tip
If the FM broadcast is noisy, press MODE until "Mono" appears in the display and the radio will play in
monaural.
Presetting radio stations
You can store radio stations into the player's memory. You can preset up to 30 radio stations, 20
for FM and 10 for AM in any order.
1
Press POWER to turn on the player.
Then do this
2
Press > or . to select the track you want to
Press BAND•AUTO PRESET to select the band.
repeat then press u.
3
Hold down BAND•AUTO PRESET for 2 seconds until "AUTO" flashes in the
Press u.
display.
Press u.
4
Press DISPLAY/ENT/MEMORY.
Press u.
The stations are stored in memory from the lower frequencies to the higher ones.
Press > or . then press DISPLAY/ENT/
If a station cannot be preset automatically
MEMORY for the tracks you want to programme
You need to preset a station with a weak signal manually.
in the order you want up to 20 tracks (see fig. D).
1 Press POWER.
Then press u.
2 Press BAND•AUTO PRESET to select the band.
Press > or . then press DISPLAY/ENT/
3 Tune in a station you want.
MEMORY for the tracks you want to programme
4 Hold down DISPLAY/ENT/MEMORY for 2 seconds until the preset number flashes in the
in the order you want up to 20 tracks. Then Press
display.
u.
5 Press PRESET + or PRESET – until the preset number you want for the station on flashes in
the display.
6 Press DISPLAY/ENT/MEMORY.
The new station replaces the old one.
Tip
The preset radio stations remain in memory even if you unplug the AC power adaptor or remove the
batteries.
Playing preset radio stations
1
Press POWER to turn on the player.
2
Press BAND•AUTO PRESET to select the band.
3
Press PRESET + or PRESET – to tune in the stored station.