Cisco ASA 5585-X Manuale di manutenzione - Pagina 13
Sfoglia online o scarica il pdf Manuale di manutenzione per Hardware di rete Cisco ASA 5585-X. Cisco ASA 5585-X 44. Maintenance and upgrade procedures
Anche per Cisco ASA 5585-X: Manuale di avvio rapido (40 pagine), Manuale di avvio rapido (6 pagine)
Stampa la pagina
Chapter 4
Maintenance and Upgrade Procedures
Figure 4-11
Figure 4-11
Table 4-3
Table 4-3
Figure
Label
1
2
3
1. The power supply module has three output voltages—3.3V, 12V, and 50V.
Removing and Installing an AC Power Supply Module
Caution
If you remove a power supply or fan module, replace it immediately to prevent disruption of service.
If the appliance is subjected to environmental overheating, it shuts down and you must manually power
Caution
cycle it to turn it on again.
OL-22567-02
shows the AC power-supply module indicator lights.
AC Power Supply Module Indicator Lights
Cisco ASA 1200W AC
100-240V
15.0/8.0.A
56/60Hz
1
2
describes the AC power supply module indicators.
AC Power Supply Module Indicators
Indicator
Description
IN OK
Status of the power supply module:
Off—No AC power cord connected, or AC power switch is off.
•
Green—AC power cord connected and AC power switch is on.
•
FAN OK
Status of the fan module
•
Off—Fan module failure, or AC power switch is off.
•
Green—AC power cord connected, AC power switch is on, and internal fan
is running.
OUT FAIL
Red—Output voltage failure
•
Cisco ASA 5585-X Adaptive Security Appliance Hardware Installation Guide
Removing and Installing the Power Supply Module
3
1
4-13