Cisco ASA 5585-X Manuale di manutenzione - Pagina 39
Sfoglia online o scarica il pdf Manuale di manutenzione per Hardware di rete Cisco ASA 5585-X. Cisco ASA 5585-X 44. Maintenance and upgrade procedures
Anche per Cisco ASA 5585-X: Manuale di avvio rapido (40 pagine), Manuale di avvio rapido (6 pagine)
Stampa la pagina
Chapter 4
Maintenance and Upgrade Procedures
Mounting the Chassis Using a Fixed Rack Mount
If you are not able to use the slide rail kit in your rack installation, an optional fixed rack-mount solution
is available. You can install fixed front and rear rack-mount brackets on the ASA 5585-X so that you can
easily mount it in a rack.
To fixed-mount the ASA 5585-X, follow these steps:
If the adaptive security appliance is already operational and not rack-mounted, or if you are replacing an
Step 1
adaptive security appliance with the ASA 5585-X, do the following:
Position the front bracket on the side of the adaptive security appliance and line up the bracket screws
Step 2
with the screw holes on the adaptive security appliance.
1
Tighten the screws into the chassis.
Step 3
Repeat this procedure on the other side of the chassis.
Step 4
You can now mount the chassis in a rack; go to
Step 5
with Step 6.
Attach one of the rear brackets using three M4 screws.
Step 6
OL-22567-02
Power off the adaptive security appliance.
•
Remove the power cable from the adaptive security appliance.
•
Remove the old adaptive security appliance from the rack.
•
SFP 1
SFP 0
7
6
5
4
3
2
1
0
0
1
MG MT
0
1
USB
SFP 1
SFP 0
7
6
5
4
3
2
1
0
0
1
MG MT
0
1
USB
Bracket
Cisco ASA 5585-X Adaptive Security Appliance Hardware Installation Guide
Mounting the Chassis Using a Fixed Rack Mount
AUX
CO NSO LE
RES ET
AUX
CO NSO LE
RES ET
1
2
Bracket screws
Step
12. If using the optional rear rack rails, continue
2
2
2
4-39