Cisco ASR 9000 Series Manuale di configurazione - Pagina 24

Sfoglia online o scarica il pdf Manuale di configurazione per Hardware di rete Cisco ASR 9000 Series. Cisco ASR 9000 Series 50. Line card
Anche per Cisco ASR 9000 Series: Configurazione delle impostazioni di rete (26 pagine), Manuale di configurazione (46 pagine), Manuale (24 pagine), Configurazione (46 pagine), Manuale (44 pagine), Manuale di riferimento rapido (7 pagine)

How to Configure Serial Interfaces

DETAILED STEPS

Command or Action

Step 1

configure

Example:

RP/0/0RP0RSP0/CPU0:router# configure

Step 2

interface serial interface-path-id

point-to-point

Example:

RP/0/0RP0RSP0/CPU0:router (config)# interface

serial 0/1/0/0.1

Step 3

ipv4 address ipv4_address/prefix

Example:

RP/0/0RP0RSP0/CPU0:router (config-subif)#ipv4

address 10.46.8.6/24

Step 4

pvc dlci

Example:

RP/0/0RP0RSP0/CPU0:router (config-subif)# pvc

Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide

522

Configuring Serial Interfaces on the Cisco ASR 9000 Series Router

Purpose

Enters global configuration mode.

Enters serial subinterface configuration mode.

subinterface

Assigns an IP address and subnet mask to the subinterface.

Creates a serial permanent virtual circuit (PVC) and enters

Frame Relay PVC configuration submode.

Replace dlci with a PVC identifier, in the range from 16 to

1007.

Note

Only one PVC is allowed per subinterface.

OL-26061-03