Cisco ATA 191 Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Hardware di rete Cisco ATA 191. Cisco ATA 191 30. Analog telephone adapter
Anche per Cisco ATA 191: Manuale d'uso (30 pagine), Manuale di amministrazione (4 pagine), Manuale d'uso (10 pagine), Iniziare (8 pagine), Manuale (10 pagine), Manuale di avvio rapido (13 pagine), Manuale di configurazione (6 pagine), Manuale d'uso (40 pagine)

Cisco ATA 191 Manuale d'uso

IVR Configuration Menu Options

• To exit the menu, hang up the phone.
• After entering a value such as an IP address, press the # (pound) key to indicate that you have finished
• When entering a value, you can cancel the changes by pressing the * (star) key twice within half a second.
• If the menu is inactive for more than one minute, the IVR times out. Re-enter the IVR menu by pressing
• To enter special characters, use the following key combinations:
For example, to enter the IP address 191.168.1.105, perform the following tasks:
• Press these keys: 191*168*1*105
• Press the # (pound) key to indicate that you have finished entering the IP address.
• Press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main menu.
IVR Configuration Menu Options
The following table describes the various options in the IVR Configuration Menu.
Table 3: Navigating the IVR Configuration Menu
Menu Option
100
101
102
Cisco ATA 191 Analog Telephone Adapter User Guide for Cisco Unified Communications Manager
12
your selection. Then proceed as needed:
• To save a setting, press 1.
• To review a setting, press 2.
• To re-enter a setting, press 3.
• To cancel your entry and return to the main menu, press * (star).
Be sure to press the key quickly, or the * is treated as a decimal point entry.
****. Your settings take effect after you hang up the phone or exit the IVR. The ATA may reboot now.
• To enter a dot (.) or colon (:) that separates octets in the IP Address, press star (*).
• To enter the hexadecimal A, press the 2 key two times quickly.
• To enter the hexadecimal B, press the 2 key three times quickly.
• To enter the hexadecimal C, press the 2 key four times quickly.
• To enter the hexadecimal D, press the 3 key two times quickly.
• To enter the hexadecimal E, press the 3 key three times quickly.
• To enter the hexadecimal F, press the 3 key four times quickly.
IVR Action
(IPv4) Check the Internet Addressing
Method
(IPv4) Set the Internet Addressing Method
Check Stack Mode.
Manage the ATA Using the IVR
Notes
Answers with 0, the default option
(DHCP).
0: DHCP; 1: Static IP
0: IPv4; 1:IPv6; 2: Dual