Cisco C8510MSR-SKIT-DC - Catalyst 8510 Multiservice Switch Router Come iniziare - Pagina 10

Sfoglia online o scarica il pdf Come iniziare per Hardware di rete Cisco C8510MSR-SKIT-DC - Catalyst 8510 Multiservice Switch Router. Cisco C8510MSR-SKIT-DC - Catalyst 8510 Multiservice Switch Router 16. Getting started

Stampa la pagina
To configure the MCU MSE 8510 to use a SIP registrar:
1
In the web interface, go to
2
Configure the settings you require, using the online help for further assistance.
3
Click
Apply changes
Before you configure the MCU MSE 8510 to use, and register
i
conferences to, a SIP registrar, you must set up the MCU MSE 8510 and
its conferences on that SIP registrar.

Step four: Add endpoints (optional)

One way to add participants to a conference that you create is to have the MCU MSE
8510 automatically call them when the conference starts. To do this, you configure
their endpoints on the MCU MSE 8510 . When you set up a conference, you can
choose the endpoints from the
entering each endpoint's details every time. Participants that are pre-configured for a
conference will automatically be called by the MCU MSE 8510 to join that
conference.
To define pre-configured endpoints:
1
In the web interface of the MCU MSE 8510 , go to
To add a H.323 endpoint, click
To add a SIP endpoint, click
To add a VNC screen, click
2
Configure the endpoint settings you require, using the online help for further
assistance.
3
Click
Add endpoint
Settings > SIP
.
Pre-configured participants
Add H.323
Add SIP
Add VNC
.
Configuring the MCU MSE 8510
.
list. This is easier than
Endpoints
:
10