ACU-RITE 06008 Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Accessories ACU-RITE 06008. ACU-RITE 06008 8. 3-in-1 weather sensor

3-in-1 Sensor Installation Guidelines

INSTALLATION HEIGHT

off the ground, in an open area. Higher is better for wind measurements - the

National Weather Service recommends 33 feet high!

MOUNTING OPTIONS

onto wooden posts or surfaces that are 2"x 4" or larger. The sensor can also be

mounted directly to 3/4" steel pipe

(available at hardware stores and

home centers).

LEVEL INSTALLATION

bubble level (not included) to ensure

level installation for accurate wind

measurement.

Top or Side Mount

1. Insert the mounting base into the

hole on the bottom of the sensor.

2. Use the set screw included in the

hardware bag to fasten the lower

sensor housing to the mounting

base.

3. Fasten mounting base to a post or

railing using the 4 longer screws.

Pipe Mount

1. Insert pipe or similar item all the way

into the hole on the bottom of the sensor.

Note: Mounting base is not used.

2. Use the set screw included in the hardware

bag to fasten the lower sensor housing

securely to the pipe.

The 3-in-1 sensor is now ready to use.

Basic Setup is Complete

The 3-in-1 sensor will now synchronize with the companion unit. It may take a few

minutes for synchronization to complete.

Mount the sensor at a minimum height of 5 feet (1.5 meters)

The included mounting bracket is designed to screw directly

Use a

Top Mount

Side Mount

Pipe Mount

Do not install during

electrical storms.

Do not place pipe

or sensor near

electrical lines or

electrical equipment.