Cisco Catalyst 3030 Manuale introduttivo - Pagina 12
Sfoglia online o scarica il pdf Manuale introduttivo per Hardware di rete Cisco Catalyst 3030. Cisco Catalyst 3030 34. Cisco systems catalyst blade switch getting started guide
Stampa la pagina
Installing the Switch Module in the Server Chassis
On the console monitor, the DRAC/MC application displays a login screen. Log
Step 3
in by using these defaults:
username root
password calvin
The DRAC/MC command-line interface (CLI) command prompt DRAC/MC:
appears.
If the server chassis is off, use this command to power it on:
Step 4
racadm chassisaction -m chassis powerup
The switch module inserted into the chassis I/O bay automatically powers on
when the server chassis powers on. For more information on configuring the
server chassis by using the CLI see the Dell Remote Access Controller/Modular
Chassis User's Guide.
Power cycle the switch module by using this command:
Step 5
racadm chassisaction -m switch-N powercycle
where N is the chassis I/O module bay number in which the switch module is
inserted.
Redirect the DRAC/MC console to the switch module internal serial console
Step 6
interface. Enter this command at the DRAC/MC command prompt:
connect switch-N
where N is the chassis I/O module bay number in which the switch module is
inserted.
To return to the command prompt, press this key sequence:
Enter ~.
First press Enter, press tilde ~ (remember to press the <Shift> key if the tilde
character is located in the upper register of your keyboard), and then press
period . (dot).
Go to
Step 7
the switch module.
Cisco Catalyst Blade Switch 3030 Getting Started Guide
1-12
"Waiting for POST to Complete" section on page 1-13
Cisco Catalyst Blade Switch 3030 Getting Started Guide
to finish configuring
78-17052-01