Cisco Catalyst 7500 Series Sostituzione del manuale - Pagina 26
Sfoglia online o scarica il pdf Sostituzione del manuale per Hardware di rete Cisco Catalyst 7500 Series. Cisco Catalyst 7500 Series 40. Chassis interface board
Anche per Cisco Catalyst 7500 Series: Scheda tecnica (11 pagine), Manuale di risoluzione dei problemi (11 pagine), Manuale di configurazione (50 pagine)
Stampa la pagina
Replacing the CI in the Cisco 7513
Step 3
Note
sections, and then to replace the cover, proceed to Step 4, which follows.
Step 4
Step 5
This completes the backplane maintenance cover removal and replacement procedure.
Removing and Replacing the CI
The CI (shown in Figure 17) provides environmental monitoring and logic functions for the Cisco
7513.
Figure 17
Standoff
screw holes
Note
cover panels and backplane maintenance cover. If not, refer to the appropriate procedures in this
section to remove these items.
26 Replacing the Chassis Interface (CI) Board in the Cisco 7500 Series Chassis
Carefully guide the cover up and away from the chassis.
Depending on the replacement procedures you need to perform, refer to the appropriate
To replace the cover, carefully guide the cover over the ten screws. (See Figure 16.)
Align the cover; then tighten all ten screws that secure it to the chassis.
Chassis Interface (MAS-7500CI=)
Chassis interface
Replace the CI only if it fails. This procedure assumes to have already removed the chassis
Standoff
screw holes