Digitone ProSeries 3 Manuale operativo - Pagina 3

Sfoglia online o scarica il pdf Manuale operativo per Accessori telefonici Digitone ProSeries 3. Digitone ProSeries 3 16.

Stampa la pagina

Caller ID Service from your phone company is Required for Digitone's

ProSeries 3 Call Blocker to work. All calls displaying a valid phone number (except

for Out of Area or Private) will ring the phones connected to the TEL phone port with

Caller ID repeated. Blocked calls will not ring the phones connected to the TEL port.

Extension phones connected directly to the phone service will ring once on blocked

calls. Digitone recommends using a Cordless phone system to distribute rings. The first

call to your DPS3 unit will initialize the Clock and Date to the current date and time.

Automatic call routing will begin to work right after the first call when Caller ID

information is displayed. For Daylight Savings Time changes, your phone company

is responsible for updating their clock data when delivering Caller ID information.

Blocking Calls Remotely - While on the Line, and using your Phone, you can add a

blocked caller into the Caller Lists by dialing * 2 # during or after the last call. You will

then hear 2 confirmation beeps in the phone's speaker. See the DPS3 display screen to

verify entries when needed. You can also dial * 1 # to Invite or * 3 # for VIP.

Blocking Calls In Progress - To Stop a call without answering, after the Caller ID is

received, simply Tap the

will show "NBR Block Saved" for a Number or "Name Block Saved" for a Name.

RED

LED light Functions – The

1) Any new incoming call ringing in

2) Any call record not yet reviewed with an "N" displayed in top left corner of LCD

3) Any dialed number

4) All Blocked calls

Block Number

RED

Using the Call History button, locate the call record and the number you want to block.

Tap the RED Block Number button on the front panel once. "NBR Block Save?" will

display and tapping the Block Number button again will display "NBR Block Saved".

Reviewing Blocked Number List - Blocked Numbers can be instantly reviewed just

by pressing and holding the

display and any number listed can be deleted using the Delete Entry Key. "List Empty"

will display if there is no number or name stored.

Block Name

RED

Using the Call History button, locate the call record and the Name you want to block.

Tap the

RED

Block Name button on the front panel once. "Save Name Block?" will

display and tapping the Block Name button again will display "Name Block Saved".

Reviewing Blocked Name List - Blocked Name callers can be instantly reviewed just

by pressing and holding the

display and any Name listed can be deleted using the Delete Entry Key.

ProSeries 3 Call Blocker Operation

Automatic Call Blocking and Routing

RED

Number or

RED

Front Panel Buttons

Button - Blocking Numbers

RED

Block Number button. "NBR BLOCK LIST" will

Button – Blocking Names (99)

RED

Block Name button. "NAME BLOCK LIST" will

RED

Name Block Button and the display

LED light flashes for the following:

™