Digitone ProSeries 3 Manuale operativo - Pagina 7

Sfoglia online o scarica il pdf Manuale operativo per Accessori telefonici Digitone ProSeries 3. Digitone ProSeries 3 16.

Stampa la pagina

RED

LED

Code 28

Press and hold the Program Button for 3 seconds until you see "Program Mode", then

"Pick Up Phone", when the prompt for "Enter Code" displays, enter 29. Default is 28.

You can switch between the operating modes using the programming button and by

entering one of the mode numbers.

Standard, Business or Select using one of the settings below. Note: After Hours

Mode runs together with Standard, Business or Select Mode when either mode is

enabled. Mode settings are displayed only when entering Programming Mode.

Standard (default) Mode

Invited will ring phones throughout your home/office like normal and to the TEL phone

port on the back of the DPS3, except for all fake Names in

Anonymous,

OPX

answered by the DPS3 for processing and by default be hung-up. Blocked callers will

be immediately answered and after eight seconds, get hung-up on. To enable this

(default) Mode, press and hold the Program Button for 3 seconds until you see

"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays

enter 30, display shows function.

Business Mode

Code 31

Anonymous, OPX calls as well as any other type of call, you can enable Business

Mode Code 31 to allow calls through to the TEL phone port except those you want to

block. This mode also works with your phone company's voice mail but also blocks

those phone numbers you have entered into the Blocked Callers List.

blocks ALL fake Names will be disabled. To enable this Mode, press and hold the

Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone",

when the prompt for "Enter Code" displays enter 31.

Select Mode

Code 33

through to your phones connected to the TEL Port while all others can ring your voice

mail service or a separate answer machine in parallel with the DPS3. Note: You must

enter numbers into the Invited or VIP Lists to receive calls. This mode allows

the LINE to ring for all callers with valid phone numbers and is subject to OPX Code

blocking.

Also with After Hours Mode enabled, only VIP callers can ring through.

Blocked callers will be immediately answered and after eight seconds, get hung-up

on. To enable this mode, press and hold the Program Button for 3 seconds until you

see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays

enter 33, display shows function.

Viewing Caller Lists and Stored Number Removal

You can review what numbers are stored in each caller list by entering programming:

1) (Preferred) Take the Phone in the TEL port off-hook, Dial ## or *** to go

directly into programming or,

2) press and hold the Program Button for 3 seconds until you see Program Mode,

then Pick Up Phone, when the prompt for Enter Code displays enter:

- If you don't want to see the LED flashing at all, you can disable it.

Operating Modes

Code 30

- When calls come in, all phone numbers that are

or calls showing no phone number.

- If you are running a business and want to hear from

- In Select Mode, you can enter only the callers you want to ring

The DPS3 can toggle between the modes

Code 03#*

filter,

These calls will be

Code 03#*

that