Cisco Firepower 2110 Manuale d'uso

Sfoglia online o scarica il pdf Manuale d'uso per Hardware di rete Cisco Firepower 2110. Cisco Firepower 2110 8. Rack-mount and ground the chassis
Anche per Cisco Firepower 2110: Manuale del software (37 pagine), Manuale (12 pagine), Come iniziare (42 pagine)

Stampa la pagina

Firepower Easy Deployment Guide for Cisco

Firepower 1000 or 2100 Firewalls

First Published: 2020-10-28

Last Modified: 2021-05-18

Firepower Easy Deployment Guide for Cisco Firepower 1000 or 2100

Firewalls

This document provides information about two easy deployment options for customers of Firepower Threat

Defense (FTD) version 6.7 and later: Low-Touch Provisioning for Cisco Defense Orchestrator (CDO) customers

and Remote Branch Office Deployment for Firepower Management Center (FMC) customers.

• See

Low-Touch Provisioning Using CDO

Low-touch provisioning allows anybody to connect a new Firepower 1000 or 2100 series device to their

network so that their IT department can onboard the device to CDO and configure it remotely.

What do you want to do?

•

Connect a New Cisco Firepower Firewall to Your Network

This topic describes the process of connecting your Firepower firewall to your network so that it can be

managed remotely by a CDO administrator.

If you received a Firepower firewall at your branch office and your job is to plug it in to your network,

watch this video.

The video describes your firewall and the LED sequences on the device that indicate the device's status. If

you need to, you'll be able to confirm the device's status with your IT department just by looking at the LEDs.

These are the steps described in the video:

1. Your Firepower firewall needs to be one of a certain model number and needs to have FTD version 6.7

installed on it for low-touch provisioning to work. The table below shows the Firepower models that

support low-touch provisioning.

Low-Touch Provisioning Using CDO, on page 1

to your network or to manage that new firewall with CDO.

Remote Branch Office Deployment of FTD Devices for Management by an FMC, on page 7

you are an FMC administrator and want to manage an FTD at a remote branch using FMC.

Connect a New Cisco Firepower Firewall to Your

Onboard a Firepower Firewall to CDO Using its Serial

Firepower Easy Deployment Guide for Cisco Firepower 1000 or 2100 Firewalls

if your job is to connect a new Firepower firewall

Network. I work at the branch office.

Number. I am the CDO administrator.