Argon 18 E-118 NEXT Manuale di montaggio - Pagina 13
Sfoglia online o scarica il pdf Manuale di montaggio per Bicicletta Argon 18 E-118 NEXT. Argon 18 E-118 NEXT 19.
Anche per Argon 18 E-118 NEXT: Manuale di viaggio (8 pagine), Manuale (8 pagine)
Stampa la pagina
6. Handlebar assembly
FIG 2
Depending on the cut, the extension bar
gives you two options
5d
GREASE
GREASE
6Nm
5h
6Nm
Straight extension bar
Curved extension bar
CARBON FIBER ASSEMBLY GEL
5f
5b
5c
1 . Cut the extension bars
some carbon fiber assembly gel in
2 . Insert the extension bars into the
3 . Tighten the extension bars using the
Note: It is possible to obtain the straight
extension bars by cutting the curved
section of extensions
5b
or
5c
at
the desired lengths and apply
the clamping area
connectors
and insert the shim
5d
under the extension bars . Make
sure the shims are centered on the
set screw
set screw
5h
FIG 2
5f