Cisco Firepower 4150 Manuale - Pagina 19

Sfoglia online o scarica il pdf Manuale per Hardware di rete Cisco Firepower 4150. Cisco Firepower 4150 42. Rack-mount and ground the chassis
Anche per Cisco Firepower 4150: Manuale di manutenzione e aggiornamento (20 pagine), Manuale (36 pagine), Manuale (26 pagine), Manuale (8 pagine), Come iniziare (42 pagine)

Stampa la pagina

Overview

40-Gb Network Module with Hardware Bypass

The following figure shows the front panel of the 40-Gb hardware bypass network module

(FPR4K-NM-2X40G-F). The FPR4K-NM-2X40G-F is a single-wide module that does not support hot

swapping. The two ports are numbered left to right. Pair the two ports to create a hardware bypass paired set.

Note

Figure 13: FPR4K-NM-2X40G-F

Network activity LEDs

• Left LED—Green indicates network activity

when a 10M/100M/1G connection is made.

• Right LED—Not in use at this time.

Make sure you have the correct firmware package and software version installed to support this network

module. For instructions on how to verify your firmware package version and to upgrade the firmware if

necessary, see the

Cisco Firepower 4100/9300 FXOS Firmware Upgrade

FXOS Compatibility

for the software compatibility matrix.

Captive screw/handle

Port 2 Ethernet X/2

Ports 1 and 2 are paired together to form a

hardware bypass pair.

40-Gb Network Module with Hardware Bypass

—

Guide. See

Port 1 Ethernet X/1

Ports 1 and 2 are paired together to form a

hardware bypass pair.

Port 1 network activity LEDs:

• Amber—No connection, or port is not in use,

or no link or network failure.

• Green—Link up, no network activity.

• Green, flashing—Network activity.

Cisco Firepower 4100/9300

Overview