argon audio ALTO Center Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Altoparlanti argon audio ALTO Center. argon audio ALTO Center 4.

Stampa la pagina

Owner 's manual

Dear Customer,

Quality has always been our driving force and founding

Argon Audio is a natural extension of this philosophy.

We have 20 years' experience in creating and specifying

high quality products, manufacturing them and selling

them on to end users with Value-for-Money as the primary

aim. And Argon Audio is a brand fully compliant with these

values.

Design, features and quality standards are all specified in

Denmark and manufacturing takes place in the Far East,

where quality vendors are highly competitive - and as a

result supply outstanding Value-for-Money products

– to the delight of both ourselves and our customers!

Introduction

Thank you for choosing Argon Audio loudspeakers, we

hope It will bring you many years of enjoyment.

Please read this manual fully before unpacking and

installing the product.

Carton contents

We have during production and packing carefully checked

and inspected this loudspeaker.

After unpacking please check for any damage from

transport.

We recommend that you keep the original carton box and

packing material for any future shipping.

Loudspeaker installation

The speaker is best used with the tweeters approximately

at ear level when seated.

w w w . a r g o n a u d i o . c o m

A L T O c e n t e r

Loudspeaker positioning

Variations in placement of your loudspeakers can produce

dramatic differences in the way music sounds. No listening

rooms are the same and therefore we encourage you to

spend some time experimenting with which placements

work best in your listening room. Trust your ears and be

willing to experiment freely. You can start with our basic

recommendations.

To begin with, the centre loudspeaker should be positioned

horizontal directly under your TV.

Home Theatre Systems

Argon ALTO Center can be used as centre channel in a

surround sound home theatre system.

Positioning the centre loudspeaker close to your TV will

create the best sound image in scale with the visual image.

If Argon ALTO Center are to be used for reproducing the

surround channels in a multi channel home theatre system,

we suggest you place them as illustrated in Figures 2 to 5

depending on the number of channels.

Connecting your loudspeakers

We recommend that you read the manual of your amplifier

or av-receiver carefully before connecting your loudspeaker.

Please switch off all equipment when connecting your

loudspeaker. The binding posts on the terminal accepts wire

up to Ø 4mm or cables with banana plugs.

Make sure that positive terminal binding posts on the

speaker (marked + and colored red) are connected to the

positive output terminal binding posts on the amplifier and

that the negative terminals on the speaker (marked – and

colored black) are connected to the negative output terminal

on the amplifier. See fig 5.