Digitrax SoundFX SDN144A0 Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Convertitore multimediale Digitrax SoundFX SDN144A0. Digitrax SoundFX SDN144A0 12. Drop in mobile decoder for atlas n

Parts List
1 SDN144A0 light board replacement Decoder with Sound FX™
1 Factory wired 18mm x 10mm 8 Ohm speaker.
1 Factory wired 100 uF/25V capacitor ,

Installation Information

See the Digitrax Decoder Manual for complete decoder test procedures, instal-
lation instructions, programming and technical information. Digitrax manuals
and instructions are updated periodically. Please visit www.digitrax.com for the
latest versions, technical updates and additional locomotive-specific installation
instructions. Machining or modification of frames or shell parts require some
skill and patience, as they are easily damaged. After market pre-machined
frames may be available for some locomotives.
Figure 1: SDN144A0 installation in Atlas N-GP38
N scale GP38 shell
kapton tape across
frame, under capacitor
Factory wired 100uF capacitor
1. Carefully remove the Atlas GP38 shell parts. Remove the factory analog
light PCB, trucks, drive shafts, motor and all parts and carefully save these in
the correct order for re-installation.
2. Place the decoder in position on one frame half and route the motor tabs
through the PCB slots, as shown in Figure 1. Reassemble the mechanism
making sure that the track pickup springs are not bent from position, which
may cause poor pickup. If the decoder power tabs in the frames are a loose
fit due to tolerances, it is useful to place some kapton tape under the
decoder (in front of motor tabs) to make the fit more snug.
3. The rear light and number boards part shown removed in Figure 2 will need
©2011 Digitrax, Inc.
Complete Train Control
Run Your Trains, Not Your Track!
SDN144A0
motor tabs in PCB slots
decoder power tabs
track pickup springs
www.digitrax.com
1 Instruction sheet
BLMA rear fan details
Atlas GP38 frames
18 x 10 mm
Factory speaker
kapton tape across
frame, under speaker
2