Digitrax SoundFX SDN144A0 Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Convertitore multimediale Digitrax SoundFX SDN144A0. Digitrax SoundFX SDN144A0 12. Drop in mobile decoder for atlas n

Stampa la pagina

FN/F0.

2. Choose AD2 for 2 digit addressing or AD4 for 4 digit addressing (DT400/DT402

and DT300). (Ad for DT100 & DT200, see set manual for 4 digit instructions).

3. Choose the address you want to set up for the decoder.

4. Complete address programming. On DT400/DT402 press ENTER. On DT300,

DT100 & DT200 press SEL.

Note: CV29 must also be programmed to enable 4 digit addressing, this is

done automatically by the DT400/DT402 & DT300 but not on earlier throttles.

Digitrax LocoMotion® System

Your locomotives look like the real thing, now you can make them run like the

real thing, too. Digitrax decoders incorporate torque compensation for smooth

as silk operation. You can also program CVs that control momentum, 3 step

and 128 step speed tables, switching speed, normal direction of travel,

scaleable speed stabilization and more to take full advantage of the Digitrax

LocoMotion

System.

Momentum-CV03 & CV04

Momentum is part of the LocoMotion

CV03 and deceleration by CV04. Both come from the factory set to 000. A

range of 000 to 031 is available for both accel and decel. Try CV03:003 and

CV04:000 as a starting point for experimenting with momentum.

Speed Tables-How the Loco Responds to the Throttle

With Digitrax LocoMotion

and High Resolution 28 Step Tables. Please see your Decoder Manual for a

discussion of the 28 Step Tables. The 3 Step Tables are set up by programming 3

CVs: Start Voltage (CV02), Mid point Voltage (CV06) and Max Voltage

(CV05). These values are set at 000 at the factory. All have a range of values

Loco Type

Switcher

Concentrated low speed. Limited top

speed

Road Switcher

Prototypical top speed w/evenly

distributed curve from 0 to top speed

Mainline Loco

Quick increase to cruising speed then

levels off to prototypical top speed.

from 000 to 255. We recommend the following CV values as a starting point for

experimenting with speed tables.

2443 Transmitter Rd

Panama City, FL 32404

www.digitrax.com

System. Acceleration is controlled by

, there are two types of speed tables: 3 Step Tables

V Start

www.digitrax.com

V Mid

CV02

CV06

002

038

002

048

002

128

850-872-9890

850-872-9557

V Max

CV05

064

098

154