Digitrax TSMK Manuale

Sfoglia online o scarica il pdf Manuale per Unità di controllo Digitrax TSMK. Digitrax TSMK 4. Terminal strip mounting kit-all scales

TSMK

Terminal Strip Mounting Kit-All Scales

Features & Specifications

Easy no solder wiring of any LED type scale or model signal mast.

Current setting resistors are built in to the board.

Parts List

2 Terminal Strip Mounting Kits

Terminal Strip Mounting Kit

The Digitrax Terminal Strip Mounting Kit make it simple to connect any scale

or model signal to the Digitrax signaling system without soldering. Simply

connect the wires from the signal to the TSMK's screw terminals and plug it in

to the SE8C's Signal Driver Cable.

How do you use these terminal strip circuit boards?

You can attach any of a variety of types of model signal masts in any scale you

choose to the Terminal Strip Mounting Kit.

The Terminal Strip Mounting

Kit has 10 screw termi-

nals that connect the

wires from your signal

mast to the SE8C Signal

Driver Cable. Current

setting resistors for your

LEDs are included on the board. The SE8C can

accommodate a variety of signal types including searchlight signals with either

2-lead or 3-lead type bi-color green/red LEDs.

The SE8C signal control cables are run under the layout and the TSMK is

plugged into the signal control cable socket.

Warning: Current setting resistors with a minimum value of 100 ohms must

be used with all LEDs operated with your SE8C. These resistors are incorpo-

rated into the Terminal Strip Mounting Kit board. If you do not use this

board, you must add your own resistors to prevent damage to the board.

Complete Train Control

Run Your Trains, Not Your Track!

10 Screw Terminals

www.digitrax.com

Signal Control

Cable Socket

Current

Setting

Resistors