Cisco Physical Access 1125 Appliance Manuale d'uso - Pagina 32

Sfoglia online o scarica il pdf Manuale d'uso per Hardware di rete Cisco Physical Access 1125 Appliance. Cisco Physical Access 1125 Appliance 42.

Rack Mounting the Cisco PAM 1125 Appliance

Figure 3-12

Mounting the 1125 Appliance in a Four-Post Rack

When the appliance is installed in a rack and is fully extended on its slide rail, it is possible for the

Warning

rack to become unstable and tip over, which could cause serious injury. To eliminate the risk of rack

instability from extending the rail or in the event of an earthquake, you should affix the rack to the

floor.

The four-post slide rail kit consist of individual left and right slide rails.

the features of the four-post slide rail.

This section contains the following topics:

•

Note

Each rail consists of three pieces that slide to extend the rail to its full length. To access the features of

the innermost piece, such as the release levers (see

piece and pull it firmly out of the piece that contains it.

Cisco Physical Access 1125 Appliance User Guide

3-14

Front-Mounting the Chassis in the Rack

C is

c o

P h

y s

ic a

l A

Setting the Multi-Pin Adapters for Rack Type, page 3-15

Installing the Slide Rails into a Rack with Square Holes, page 3-16

Installing the 1125 Appliance into the Slide Rails, page 3-19

Chapter 3

c c

e s

s M

a n

a g

Figure

Rack Mounting the Cisco PAM 1125 Appliance

Figure 3-13

3-13), you must grasp the end of the innermost

shows the some of

OL-20929-01