Cisco RSP7000 Manuale di installazione e configurazione - Pagina 20

Sfoglia online o scarica il pdf Manuale di installazione e configurazione per Hardware di rete Cisco RSP7000. Cisco RSP7000 48. Upgrade kit in the cisco 7000 series routers
Anche per Cisco RSP7000: Installazione (26 pagine)

Stampa la pagina

Installation Procedures

Note

recommend a particular slot location for the RSP7000. Processor module slots in the Cisco 7010 are

oriented horizontally

Figure 4

Step 3

Caution

Cisco 7000 (see Figure 1) or slot 3 of the Cisco 7010 (see on Figure 2) The slots are keyed for correct

installation. Forcing the RSP7000 into a different slot can damage the backplane and the RSP7000.

20 7000 Series Route Switch Processor (RSP7000) Installation and Conﬁguration in the Cisco 7000 Series Routers

Figure 4 shows a typical processor module installation, and is not intended to indicate or

Ejector Levers and Captive Installation Screws, Cisco 7000 Orientation Shown

Captive

installation

screw

Place the back of the RSP7000 in the 7000 RSP slot and align the notches along the edge

of the carrier with the grooves in the slot. (See Figure 4a.)

To prevent damage to the backplane, you must install the RSP7000 in slot 5 of the

Bottom ejector lever

Processor

Processor module

module

slot

carrier guide

STOP!

on contact