Digitus 4-Port Desktop USB KVM Switch with USB 2.0 Hub Manuale - Pagina 7
Sfoglia online o scarica il pdf Manuale per Interruttore Digitus 4-Port Desktop USB KVM Switch with USB 2.0 Hub. Digitus 4-Port Desktop USB KVM Switch with USB 2.0 Hub 18. 4-port pocket usb kvm switch with usb 2.0 hub
Anche per Digitus 4-Port Desktop USB KVM Switch with USB 2.0 Hub: Manuale (18 pagine)
Stampa la pagina
3. Install USB KVM Switch
3.1 System Requirements
A PC with 1 spare USB port and 1 VGA port.
Windows 98 or later, Mac OS9/OSX, Solaris 8 (SUN BLADE 100), Linux
Kernel 2.3 or later.
3.2 Hardware Installation
Make sure that the USB port of your computer is enabled and working
properly. Connect the USB cable Type-A end to the USB port of your
computer, and the USB cable Type-B end to the any available upstream
on USB KVM Switch.
Connect the VGA male-to-female cable between the video port of your
computer and video port that corresponds to the USB port you selected in
step 2. Repeat steps 1-3 for any other computers you are connecting up.
Up to 4 computers can be connected at the same time.
Plug the power adaptor cable into the USB KVM Switch (optional).
3.3 Notice for Sun Micro System user
Since some Sun Micro system will detect the monitor information, if
system fail to get information from the Monitor, then you won't get any
screen came out. So for safety, "YOU MUST SWITCH USB KVM
SWITCH TO THE SUN MICRO SYSTEM" before you power on the Sun
Micro System. After you seeing the screen from the Sun Micro System,
then you can switch to any other Host. If you have multiple Sun Micro
systems, then you have to repeat this procedure one by one. Some Sun
Micro system do not support the USB 2.0 HUB feature during the booting
period time, if you are using the Sun Micro System, it is possible that you
will see the system show up keyboard detected fail message, screen go
to blank for few minutes, then the login screen will come out.
3.4 Powering up USB KVM Switch
USB KVM Switch supports USB plug & play technology. All the
components can be added and removed at any time without the need to
shut the unit down.
3.5 Driver Installation (Windows 98/SE only)
After you connect USB KVM Switch to your PC, Win 98 will automatically
detect the device and prompt for the driver installation. Please install USB
KVM Switch by following the instruction from Step A-E. Please have your
Windows 98 CD ready.
- 7 -
7