Cisco TELEPRESENCE MCU ACCESSING CONFERENCES - Manuale introduttivo - Pagina 8
Sfoglia online o scarica il pdf Manuale introduttivo per Hardware di rete Cisco TELEPRESENCE MCU ACCESSING CONFERENCES -. Cisco TELEPRESENCE MCU ACCESSING CONFERENCES - 15. Accessing conferences
Creating a new conference
If you system adminstrator allows it, you may be able to start a new conference that
takes place immediately, known as an ad-hoc conference.
To create a new conference, select
menu. You will need to assign a conference ID and optional PIN (to restrict access to
the conference). If you do not want to enter a PIN, press the pound/hash key (#) at the
enter PIN voice prompt.
When you have created the conference, other participants can join (refer to Calling in
to conferences on page 3).
Accessing other auto attendant menus
The auto attendant may have links to one or more auto attendants giving you access to
additional conferences.
Leaving a conference
When the conference ends, you will be automatically disconnected from the
conference. If you want to leave the conference before it's scheduled end time, you can
simply hang up/disconnect the call using the disconnect button on your endpoint.
To disconnect a call when using ConferenceMe, simply close the application using the
Close button in the top right corner of the window.
To disconnect a call when using Movi, either click the Close button in the top right
corner of the window, or click the
Returning to the auto attendant
If you joined the conference from an auto attendant and want to return to the auto
attendant:
if you are using FECC, press zoom out. A menu is displayed; choose
auto attendant
if you are using DTMF tones, press 7. The zoom out menu is displayed. Press 8 to
navigate down through the options until you select
Press 6 to choose that option
It is not possible to access the auto attendant menu using ConferenceMe or Movi.
Create new conference
button.
Disconnect
Using an auto attendant
from the auto attendant
Return to
Return to auto attendant
.
8