Cisco 2500 Series Manuale di configurazione - Pagina 16

Sfoglia online o scarica il pdf Manuale di configurazione per Server Cisco 2500 Series. Cisco 2500 Series 19. Wireless controller
Anche per Cisco 2500 Series: Manuale di installazione (12 pagine), Manuale d'uso (23 pagine), Manuale di configurazione (50 pagine), Manuale introduttivo (47 pagine)

Configuring the Access Server

Entering the Asynchronous Interface Addresses

After the asynchronous lines have been configured and the routing protocols have been

selected, enter the IP addresses for each asynchronous interface.

For information on asynchronous protocols, see the section "Asynchronous Protocols" in

the appendix "Internetworking Primer," and for information on IP addressing, see the

section "Desktop Protocols" in the appendix "Internetworking Primer."

Step 1

4-16 Cisco 2500 Series Access Server User Guide

Configure IP unnumbered on this interface? [no]: yes

IP address for this interface: 172.16.74.2

Number of bits in subnet field [8]:

Class B network is 172.16.0.0, 8 subnet bits; mask is 255.255.255.0

Configure AppleTalk on this interface? [no]: yes

Extended AppleTalk network? [yes]:

AppleTalk starting cable range [2]: 4

AppleTalk ending cable range [3]: 4

AppleTalk zone name [myzone]: ZZ Serial

AppleTalk additional zone name:

Configure IPX on this interface? [no]: yes

IPX network number [2]: B002

Enter the IP address for each of the asynchronous interfaces on the access server:

Configuring interface Async1:

Default client IP address for this interface [none]: 172.16.72.11

Configuring interface Async2:

Default client IP address for this interface [172.16.72.12]:

Configuring interface Async3:

Default client IP address for this interface [172.16.72.13]:

Configuring interface Async4:

Default client IP address for this interface [172.16.72.14]:

Configuring interface Async5:

Default client IP address for this interface [172.16.72.15]: