Epson 4870 - Perfection Pro Informazioni sul prodotto - Pagina 3

Stampa la pagina

Epson 4870 - Perfection Pro Informazioni sul prodotto

4. Click the

button at the bottom of the screen. Your

Preview

photo appears in the Preview window.

5. Click the

button to select the image area to be scanned.

Adjust the marquee if necessary.

6. Do one of the following:

❏ If you're using Home Mode, click the

button.

Adjustments

❏ If you're using Professional Mode, scroll to the bottom

of the screen.

7. Select the

Digital ICE

❏ If your photo is dirty, scratched, creased, or torn, select

Digital ICE

❏ If the colors in your photo are faded, select

Restoration

Note:

You can select both settings if necessary.

8. Click the

button.

Scan

9. Click the

button. Your image now appears in

Photoshop Elements.

Image

checkbox:

Color Restoration

Color

Scanning Transparencies and Film

Before scanning transparent documents, you need to remove

the scanner's reflective document mat; this exposes the scanner's

transparency unit (light source), which is built into the lid.

If you're scanning slides or film strips, you'll also need to use

one of the film holders.

Using the Transparency Unit

1. Make sure the transparency unit cable is connected to the

option interface connector on the back of the scanner.

(If it is not connected, turn off the scanner, connect the

transparency unit cable, then turn the scanner back on.)

2. Lift the scanner lid all the way up and pull the reflective

document mat up and off of the scanner lid, as shown.

3. If you are scanning film or negatives, open the cover, then

slide the film into the corresponding holder, with the film's

shiny base side facing down. (If you are scanning slides, go

to step 6.)

12/03

EPSON Perfection 4870 Series

EPSON Perfection 4870 Series - 3