Cisco 7513 Series Manuale di avvio rapido - Pagina 25

Sfoglia online o scarica il pdf Manuale di avvio rapido per Server Cisco 7513 Series. Cisco 7513 Series 44. Chassis replacement
Anche per Cisco 7513 Series: Manuale di istruzioni per la sostituzione (26 pagine), Scheda tecnica (11 pagine), Manuale (30 pagine), Mantenimento (20 pagine), Manuale di istruzioni per la sostituzione (19 pagine), Manuale di istruzioni per la sostituzione (22 pagine)

Install Field Replaceable Units (FRUs)

Flash Memory Cards

A Flash memory card that ships with your Cisco

7513 or Cisco 7576 contains the Cisco IOS software

image to boot your router. You do not need to

format it.

The RSP has two PC Card slots—slot 0 and slot

1—into which you can install a Flash memory card.

In the RSP2, RSP4, and RSP8, the orientation is

vertical. PC Card slot 0 is on the left and slot 1 is on

the right (as shown).

Note

A Flash memory card can be inserted and

removed with the system power on. Both PC Card

slots can be used at the same time.

Step 1

To eject the card, press the appropriate

eject button until the card is free of the

connector at the back of the slot (see C).

Step 2

Remove the card from the slot and place it

in an antistatic bag to protect it.

Step 3

Face the front panel of the RSP, and hold

the Flash memory card with the connector

end of the card toward the slot (see A).

The label should face right.

Note

The Flash memory card is keyed and cannot

be seated the wrong way. The eject button will not

pop out if the card is not properly inserted.

Step 4

Insert the card into the appropriate slot

until the card completely seats in the

connector at the back of the slot and the

eject button pops out toward you (see B).

Note

The card does not insert all the way inside the

RSP; a portion of the card remains outside of the

slot. Do not attempt to force the card past this point.