Epson CX6600 - Stylus Photo Printer Manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Manuale operativo per Scanner Epson CX6600 - Stylus Photo Printer. Epson CX6600 - Stylus Photo Printer 50. Epson scan icm updater v1.20 (psb.2008.07.001)
Anche per Epson CX6600 - Stylus Photo Printer: Iniziare qui Manuale (8 pagine), Manuale informativo (4 pagine), Manuale rapido (48 pagine), Iniziare qui Manuale (8 pagine), Manuale (14 pagine), Manuale di aggiornamento (2 pagine), Manuale di configurazione (2 pagine), Aggiornamento (1 pagine), Manuale rapido (47 pagine)

Epson CX6600 - Stylus Photo Printer Manuale operativo
Be sure your AC power cord meets the relevant local safety
standards.
Do not use a damaged or frayed power cord.
If you use an extension cord with this product, make sure that the
total ampere rating of the devices plugged into the extension cord
does not exceed the cord's ampere rating. Also, make sure that the
total ampere rating of all devices plugged into the wall outlet does
not exceed the wall outlet's ampere rating.
If you plan to use this product in Germany, the building installation
must be protected by a 10 or 16 amp circuit breaker to provide
adequate short-circuit protection and over-current protection for
this product.
When using a memory card
Do not remove the memory card or turn off this product while the
computer and the memory card are communicating (when the
memory card light is flashing).
The methods for using memory cards vary according to card type.
Be sure to refer to the documentation packaged with your memory
card for details.
Use only memory cards compatible with this product. Refer to
"Loadable memory card" on page 34.
When handling ink cartridges
Do not open the ink cartridge packages until just before you install
them.
When installing the new ink cartridge, shake it four to five times
before opening its package.
Do not shake the ink cartridge after removing from the package; this
can cause leakage.
Be careful not to break the hooks on the side of the ink cartridge
when you remove it from its package.
6
Safety Instructions